Repair Manual, Parts List, Diagrams and Assembling Charts

23102 Page 41
DEFECTS: CAUSES:
SERVICING:
The
two
terminal plates (10029) Set the ASA scale on the shutter
affixed to the variable resistor do speed dial at ASA 100 and the
Even when the warning not make contact with the contact shutter speed at “B” and bend
signal (the index of the piece (10032). (10029) with tweezers so as to
shutter speeds) turns to make it contact with (10032).
red, the needle of the
meter does not rest
properly.
NOTE:
When the index turns to
red, the needle must drop
to the
(—)
side beyond the
“off” position.