Repair Manual, Parts List, Diagrams and Assembling Charts

23102 Page 31
REFERENCE
“Time of exposure” usually refers to the time of exposure at the centre of the picture format.
7. Adjustment of Synchro Contact Mechanism
a. ADJUSTMENT OF TIME LAG AT X CONTACT
From the mechanical construction of this camera, the synchro contact piece of the camera cannot be adjusted
by viewing its contact condition. Therefore, necessary adjustment should be made by checking the contact
condition with the synchro measuring unit of the shutter speed tester.
Set the speed at 1/60 sec. and adjust by bending the X contact A (05024) with tweezers, with the shutter
cocked.
Standard over 0.5 ms