User manual

10
FILM LOADING
1. Open the back by pulling out the rewind knob
until back cover snaps open.
2. Place the film cassette into the cassette chamber,
and
push back the rewind knob. Draw out the film
leader and
insert it into slot of the take-up spool.
3. Advance
the film by alternately turning the rapid
wind lever
and releasing the shutter until both
sprockets have properly engaged the film perfora-
tions. Close
the back by pressing it firmly.
4.
If the film is properly loaded, the rewind knob will
turn counter -clockwise when you advance the film
by turning the rapid wind lever.