Service Manual, Parts List, Diagrams and Assembling Charts

LIST OF BONDS
NOTE:
1. Immediately after use of binding agent, its container has to be capped tightly. Preferably it
should be divided and kept in as smaller containers as possible. When not in use, the container
has to be capped tightly.
2. Do not use stale binding agent that has been kept for a long time. The binding strength
deteriorates if thinned from time to time with solvents.
Pliobond
Binding Places Tool
A30 (body covering, left) A01 (body proper) Brush
A31 (body covering, right) " "
A41 (light seal) " Thin Japanese writing brush
A42 (light seal) " "
A33 (back cover covering) A02 (back cover) Brush
A40 (indicator window) A03 (top cover plate) Thin Japanese writing brush
A44 (prism scat) " Brush
A32 (key housing covering) A13 (key housing) "
B63 (focus adjust screw) B02 (mirror housing) Thin Japanese writing brush
B86 (mirror shock absorber) " "
Set screw, flat, 1.7x4 (prism adjustment) B01 (prism seat) "
B61 (light seal) B02 (mirror housing) "
Screw Lock No. 2
A43 (strap hook screw) A21 (strap hook) Thin Japanese writing brush
B13 (mirror seat rest screw) B02 (mirror housing) "
C73 (rapid wind lever retainer screw) C03 (rapid wind lever) "
E105 (sync. gear column.) A01 (body proper) "
Shellac
E03 (1st curtain edger) E64 (1st curtain) Spatula
E04 (2nd curtain edger) E65 (2nd curtain) "
W5 1.8x5 A01 (body proper)
A05 (front cover plate)
Brush
230-2 -35-