Service Manual, Parts List, Diagrams and Assembling Charts

ManualsBrandsAsahi Pentax - Honeywell Pentax ManualsDigital CamerasS3

Table Of Contents

PRODUCT NO.230-2
- ASAHI PENTAX S3
  - Product #
    - Model Description
    - Major Difference
SUMMARY OF STRUCTURE AND PERFORMANCE
- C05-1
  - The Longest
    - A
      - B
        CAUSES OF DEFECTS AND SERVICING
Pliobond
Solvents and Additives of Bonds
- EXPLODED ILLUSTRATIONS
  - Fig. 6LIST OF SERVICE PARTS
    - ASAHI PENTAX S3
      - ASAHI PENTAX S3

Photo 1

(2) Relative position of the shutter curtains and the bottom selector gear (E14), after assembling (E14) with

bulb lever parts, should be determined by gearing (El4) with (Ell) in the wound-up condition of the

shutter curtain as illustrated in Diagram 7. (E14) and the pinion shaft need oiling.

NOTE: When resetting the shutter curtains to the un-cocked condition, do it slowly. (Diagram 7)

Diagram 7

(3) After the top selector gear (El5) is mounted, the location of the 1st and 2nd curtain edgers (E03, E04)

should be adjusted as illustrated in Diagram 8. For winding the shutter curtains, use special tool No.

229K-E64, E65--A, and you will find the job easier.

230-2 -11-