Repair Manual, Parts List, Diagrams and Assembling Charts

23602 /2
3. P.C. board attern assembly (T100) removal
P.C. board pattern assembly (T100) can be taken
out with or without removing Front Board.
Pull it out hooking the large black I.C. with spring
hanger. Don't touch the other I.C.s or electric parts.
4. Front board removal
Front board can be removed
without taking off Self-Timer
lever or covering, as shown in
photograph.
5. Shutter mechanism (E000) removal
Shutter mechanism (E000) is so delicate and sensitive that it should not be touched with bare
hands except the parts as shown in the photograph. It may cause malfunctions if handled
roughly.
Use finger cover for removal.
Fig. 4
Fig. 5
Fig. 6
Fig. 7