User manual

Web Panel User Manual Rev. 2
6 Operating a Web Panel
6.1 Panel selection
The user can easily switch between the panels by clicking the panel name on the left side of
the web page.
6.2 Function buttons
This section describes the functionality of the standard function buttons.
Every function button described here is optional and can be left out of any button
configuration.
6.2.1 Panel Enable
This button is used to enable or disable a Web Panel (all buttons).
One click on the button changes its state between:
Enabled Disabled
6.2.2 Take On/Off
This button is used to enable or disable the “Take” button. When the “Take” button is
enabled, all cross point switching must be acknowledged by clicking the “Take” button, for
example when switching a source to a destination or when switching a salvo.
One click on the button changes its state between:
Enabled Disabled
network-electronics.com | 19