Specifications

SPECIFICATIONS FOR AUTOSOUND D CLASS AMPLIFIERS
PowerBass Autosound Class D Models ASA3-600.1D ASA3-1000.1D ASA3-1500.1D
Power Output @ 14.4 VDC Input
• 4 Ohms RMS at THD 0.5% 200W x 1 400W x 1 500W x 1
• 2 Ohms RMS at THD 0.5% 400W x 1 700W x 1 1000W x 1
• 1 Ohm RMS at THD 0.5% 600W x 1 1000W x 1 1500W x 1
• 1 Ohm Max Output 1200W 2000W 3000W
Signal to Noise Ratio > 80dB
Frequency Response 20 Hz ~ 150 Hz ± 1dB
Crossover
• Low Pass Filter 40Hz ~ 150 Hz
• Crossover Slope 12dB Octave
• Sub Sonic Filter 15Hz ~ 50Hz
• Bass EQ at 45Hz 0 ~ 18 dB
Input Gain Control 0.2V ~ 6.0V
Low Level Input Impedance 22K Ohms
Damping Factor >150 into 4 Ohms
Fuse Rating/ ATC Style 2 x 40A 3 x 40A 4 x 40A
Dimensions
• Width (W) x 9.4” (240 mm)
• Height (H) x 2.3” (58 mm)
• Length (L) mm 13.6” (345 mm) 15.5” (395 mm) 16.6” (422 mm)
Important Notes:
• Due to continuing improvements these specifications are subject to change without any
notice.
• Do not attempt to fix or repair this unit. Unauthorized repairs will void the manufacturer’s
warranty.