Technical information

Norman Wells Fire Department
SVI Emergency Vehicles
NORNWLR-0002 11/02/12
Page 35 of 63
• One (1) Hannay ECR1618-17-18 electric cable reel(s) capable of storing 200' of 10/3 electric cable. Reel(s)
shall be designed to hold 110% of the capacity of cord length, with fully enclosed 45 amp, three (3) conductor
collector rings. Reel(s) shall be mounted to channel structure that allows for side-to-side adjustment of reel
position.
− Power rewind control(s) shall be in a position where the operator can observe the rewinding operation
and not be more than 72 in. (1830 mm) above the operator’s standing position, and shall be marked with
a label indicating its function.
− A label shall be provided in a visible location adjacent to reel with following information: Current rating,
Current type, Phase, Voltage, and Total cord length.
− The cable reel shall equipped with 200' of 10/3 SEOW black cable, a molded plastic ball clamp, and a
single heavy duty L5-30 twist-lock female plug at the end.
• One (1) Akron model EJB series, cast aluminum electrical power distribution box with yellow powder coat
painted finish shall be provided. The power distribution box shall meet all requirements described in NFPA
1901. The power distribution box shall include the following outlets;
− A 12" pigtail that terminates in an L5-30 configuration to match the cable on the cord reel. The outlet
configuration shall include:
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
• One (1) Akron EJB treadplate vertical apparatus mounting bracket shall be provided.
• The fairlead roller shall be mounted directly to the reel.
• Two (2) OnScene 64" Access LED compartment lights, vertically mounted.
• One (1) OnScene 9" LED ground light shall be provided below the body.