Specifications

SVI Trucks
Freightliner 4-Door Demo
SVI #917 01/05/15
80
Light Tower Backlight Option
A backlight option shall be provided on the light tower. The lower pair of light heads shall be capable of being
rotated about a horizontal axis 180 degree, providing light down on the vehicle or to the opposite side of the
vehicle while allowing the fixed lights to remain pointed at the scene.
The hand-held remote control shall have an additional switch supplied for the backlight rotation option.
Light Tower Paint
The light tower shall be electrostatically powder coated with a hammer tone gray color.
Light Tower Controls
The light tower(s) shall be operated with a hand-held 15-foot umbilical line remote control. The storage station for
the remote control unit shall be equipped with a button to activate the "Auto-Park" automatic nesting feature. The
remote control shall be located per the itemized compartment list and include;
Three (3) switches; one (1) for each pair of lights.
One (1) switch for light bank rotation.
One (1) switch for elevating lower stage.
One (1) switch for elevating upper stage.
One (1) switch for optional light bank rotation.
One (1) switch for the optional strobe.
One (1) indicator light to indicate when light bank is out of the roof nesting position.
One (1) indicator light to indicate when light bank is rotated to proper nesting position.
Light Tower Mounting
The specified light tower(s) shall be recessed into the roof of body to allow light tower(s) to be stowed below roof
level. The floor and side walls of recessed area shall be fabricated as a separate module from 3/16" aluminum
treadplate with an overlapping 3" flange around perimeter roof line. The recessed area shall be completely water
tight. All electrical connections made to light tower shall be located on sidewalls for a water tight connection.
The recessed area shall have two (2) water drain holes (in opposite corners) with flexible 1" diameter hose routed
to the area below the body.