Specifications

SVI Trucks

Freightliner 4-Door Demo

SVI #917 01/05/15

CURBSIDE COMPARTMENT - ABOVE REAR WHEEL (C3)

The interior useable compartment width shall be approximately 59.0" wide.

The compartment door opening shall be approximately 52.0" wide.

This compartment shall have a ROM roll-up door.

 The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim

components.

 The door shall be equipped with a CPI harsh environment mechanical type door ajar switch located inside

compartment interior lower door track.

 A keyed cylinder lock shall be provided in the bottom portion of the roll-up door.

 One (1) nylon strap shall be provided to assist in closing the door. The strap shall be fastened to the left side

of the lower inside door sill. The strap shall extend from the left side of the lower inside door sill to a footman

loop attached to the center of the left side of the door frame.

 A compartment threshold protection plate shall be installed on the bottom edge of the compartment door

opening. The threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior

finish.

COMPARTMENT LAYOUT

 There shall be vertically mounted aluminum Shelf-Trac for specified component installation. Shelf-Trac

extrusion shall have side extruded channels for use in mounting or securing special ancillary items, without

need for drilling into body.

 There shall be one (1) adjustable shelf/shelves approximately 46" deep. Each shelf shall be fabricated from

3/16" 3003 aluminum sheet with a 2" vertical flange along the front and rear edges.

 One (1) OnScene 36" Access LED compartment light, vertically mounted.