Specifications

SVI Trucks
Freightliner 4-Door Demo
SVI #917 01/05/15
41
ROM DOOR BOTTOM RAIL
All exterior compartment doors shall have the standard 3.0" tall bottom rail extrusion for easy one (1) hand
opening and closing.
The specified retroreflective stripe material shall be applied on the roll-up compartment doors. The stripe shall be
precision machine cut for each door slat of the roll-up doors. Under no circumstance will the stripe material be cut
on roll-up door surface.
BODY HEIGHT MEASUREMENTS
The vertical body dimensions shall be as follows:
AHEAD OF REAR AXLE
Description
Dimension
A
Bottom of Subframe to Top of Body
74.0"
B
Bottom of Subframe to Bottom of Body
22.5"
C
Vertical Door Opening
-with roll-up door
67.5"
-with hinged door
71.5"
ABOVE REAR AXLE
Description
Dimension
D
Vertical Door Opening - Above Rear Wheel
-with roll-up door
34.0"
-with hinged door
37.0"
BEHIND REAR AXLE
Description
Dimension
E
Bottom of Subframe to Bottom of Body
20.0"
F
Vertical Door Opening
-with roll-up door
62.0"
-with hinged door
66.0"
GENERAL
Description
Dimension
G
Bottom of Drip Rail to Top of Body
23.5"
(Dimensions are generic and subject to change during the actual design process)
BODY WIDTH DIMENSIONS
The body shall be 100.0" wide, not including drip rail or non-permanent fixtures. Interior compartment depth
dimensions shall be approximately:
Area Description Dimension
Transverse Area above Subframe 95.0"
Compartment Depth below Subframe 24.5"