Specifications

SVI Trucks

Freightliner 4-Door Demo

SVI #917 01/05/15

EXTERIOR COMPARTMENT DOORS

ROLL-UP DOOR CONSTRUCTION - ROBINSON (ROM)

The apparatus shall be equipped with Robinson ROM Series III roll-up exterior compartment doors. Robinson roll-

up doors shall be complete with the following features;

 Doors shall be front roll with drum positioned at upper front portion of compartment to afford maximum

clearances and head room for mounting equipment to ceiling of compartment

 There shall be a non-abrasive side brush seals

 Every slat must have interlocking end shoes to prevent slat from moving side-to-side and binding the door

 Between each slat must be a co-extruded PVC inner seal to prevent metal-to-metal contact and to repel

moisture. This inner seal is not visible to detract from appearance of door

 Slats are to have interlocking joints with a folding locking flange to provide security and prevent penetration by

sharp objects

 Slats to be double-wall extrusion 1.366" high by .315" thick. Exterior surface to be flat and interior surface to

be concave to prevent loose equipment from interfering with door operation

 Latch system to be a full width one piece lift bar operable by one hand

 A 2" wide finger pull integrated into bottom rail extrusion for easy one hand opening and closing

 Clip system that connects the curtain slats to the operator drum which allows for easy tension adjustment

without tools

 Each roll-up door shall have a 4" diameter counterbalance operator drum to assist in lifting the door.

 Track shall be one-piece aluminum that has an attaching flange and finishing flange incorporated into its

design

 Drip rail will have specially designed seal that prevents the seal from scratching the door

 Bottom rail extrusion must have smooth back to prevent loose equipment from jamming the door

 Bottom rail to have "V" shaped double seal to prevent water and debris from entering the compartment

 Standard replacement parts to be shipped from the United States and available in as little as 48 hours

 Will be free from manufacturing defects for a period of up to 7 years from date of purchase provided that the

Product is used under conditions of normal use, that regular periodic maintenance and service is performed

and that the product was installed in accordance with R•O•M’s instructions.

Each roll-up door framework shall decrease the compartment door opening by approximately 2.25" and 4.5" in

height for standard bottom rail and 6.0" in height for tall bottom rail option.