Specifications

SVI Trucks
Freightliner 4-Door Demo
SVI #917 01/05/15
39
REFLECTIVE STRIPE - BODY SIDES
The reflective stripe material shall be 6" wide, 3M Scotchcal 680 series.
 This reflective stripe shall be white in color.
The stripe shall remain in a straight line from the front of the front of cab to the rear body.
CHEVRON REFLECTIVE STRIPE - REAR SIDES PANELS
At least 50 percent of the rear-facing vertical surfaces, visible from the rear of the apparatus, excluding any pump
panel areas not covered by a door, shall be equipped with retroreflective striping in a chevron pattern sloping
downward and away from the centerline of the vehicle at an angle of 45 degrees. Each stripe shall be 6" width.
The rear side panels of the body on each side of a rear stairway or compartment shall have a chevron style
reflective stripe, extending from bumper height up to side compartment drip rail height. Each chevron panel shall
be a full sheet and shall have a 3M UV over laminate to protect from UV rays, scene damage, and everyday use.
Chevron panel shall have a minimum 10 year warranty for material failure, and colorfastness.
The stripe material shall be 3M Diamond Grade.
This reflective chevron stripe shall alternate red and fluorescent yellow-green in color.
LETTERING
GRAPHICS PROOF
A color graphics proof of the lettering layout shall be provided for approval by Fire Department prior to installation.
The graphics proof shall be submitted to Fire Department on 8.5" x 11" sheets with front, sides, rear and plan
views, each on one (1) sheet. In addition if there is any special art work an additional sheet shall be provided
showing all details.
The following lettering shall be provided and installed on the completed unit as follows;
UPPER BODY SIDE LETTERING
There shall be twenty (20) 10" high reflective letters furnished and installed on the vehicle.
"FIRE/RESCUE"
 This reflective lettering shall be gold in color.