Specifications

SVI Trucks

Freightliner 4-Door Demo

SVI #917 01/05/15

FASTENERS

Prior to the assembly and reinstallation of exterior components; i.e. warning and DOT lights, handrails, steps,

door hardware, and miscellaneous items, an isolation tape, or gasket shall be used to prevent damage to the

finish painted surfaces. These components shall be fastened to body using either a plastic insert into body metal

with stainless steel screws or zinc coated nutserts into body surface using stainless steel bolts to prevent

corrosion from dissimilar metals.

ELECTROLYSIS CORROSION CONTROL

The apparatus shall be assembled using ECK or similar corrosion control on all high corrosion potential areas.

ECK protects aluminum and stainless steel against electrolytic reaction, isolates dissimilar metals and gives

bedding protection for hardware and fasteners. ECK contains anti-seizing lubricant for threads. ECK is dielectric

and perfect for use with electrical connectors.

PAINT FINISH - SINGLE COLOR

The body shall be painted with a single color of PPG Delfleet® Evolution paint per approved customer sprayout.

Touch-up paint shall be provided with completed vehicle.

 Paint Color: Match cab/chassis supplied paint color.

BODY UNDERCOATING

The entire underside of body shall be sprayed with black automotive undercoating. Undercoating shall cover all

areas underside of body and wheel well area to help prevent corrosion under the vehicle.

UNDERCOAT WARRANTY

The body undercoating shall have a warranty provided by the manufacturer for the lifetime of the vehicle or twenty

(20) years, whichever occurs first. The warranty shall be transferable between vehicle owners. Should the

undercoating material applied to the underside of the body and wheel wells of the vehicle ever flake off, peel, chip

or crack due to drying out, the damaged area shall be re-sprayed without charge to the vehicle owner.

PAINT WARRANTY

The vehicle shall be provided with a ten (10) year non-prorated warranty to the original owner. Warranty is

provided by PPG Inc. A warranty sheet with all conditions and maintenance procedures shall be provided with the

delivered vehicle. Pro-rated warranties will not be acceptable.

COMPARTMENT INTERIOR FINISH

The compartment interiors shall be treated with phosphoric acid and then sprayed with an epoxy primer applied

1.0 mil thick. All body seams will be caulked with urethane seam sealer and painted with two (2) coats of

Multicolor PPG spec. The Multicolor paint shall be solvent and oil resistant, impact and abrasion resistant, stain

and household chemical resistant, as well as mildew and fungus resistant. Paint color shall be silver/white/black.