Specifications

SVI Trucks
Freightliner 4-Door Demo
SVI #917 01/05/15
29
EXHAUST
The exhaust system shall be as provided by cab/chassis manufacturer. The tailpipe may require some
modifications for proper ground clearances and fit with body.
The exhaust piping and discharge outlet shall be located or shielded so as not to expose any portion of the
vehicle or equipment to excessive heating.
Exhaust pipe discharge shall be directed away from any operator’s position or entry doors on body.
Where parts of the exhaust system are exposed so that they are likely to cause injury to operating personnel,
protective guards shall be provided.
RADIO ANTENNA INSTALLATION
There shall be one (1) radio antenna mounts provided and installed on the roof of the cab/chassis. The end of
each radio antenna shall be routed to a location determined by the Fire Department.
Due to multiple configurations of antenna whips, the Body Manufacturer shall provide the antenna base, and Fire
Department shall provide the whip.
SEAT SCBA BRACKETS
There shall be three (3) Zico ULLH walkaway type SCBA air pack bracket(s) provided with strap assembly
mounted in specified SCBA seats.
SEAT BELT COLOR
Section 14.1.3.4 of the NFPA 1901 Standards, 2009 edition, requires all seat belt webbing in cab to be bright red
or bright orange in color, and the buckle portion of the seat belt shall be mounted on a rigid or semi rigid stalk
such that the buckle remains positioned in an accessible location.
SEAT BELT WEB LENGTH - COMMERCIAL CAB
Sections 14.1.3.2 and 14.1.3.3 of the NFPA 1901 standards, 2009 edition, require the effective seat belt web
length for a Type 1 lap belt for pelvic restraint to be a minimum of 60", and a Type 2 pelvic and upper torso
restraint-style seat belt assembly to be a minimum of 110".
The chassis seat belt web length as supplied by the commercial chassis manufacturer shall be compliant to NFPA
Standards 14.1.3.2 and 14.1.3.3.