Specifications
SVI Trucks
Freightliner 4-Door Demo
SVI #917 01/05/15
13
OPERATIONS AND SERVICE DOCUMENTATION
The Contractor shall deliver with the fire apparatus at least two (2) sets of complete operation and service
documentation covering the completed apparatus as delivered and accepted.
The documentation shall address at least the inspection, service, and operations of the fire apparatus and all
major components thereof.
The Contractor shall also deliver with the fire apparatus the following documentation for the entire apparatus and
each major operating system or major component of the apparatus:
1) Manufacturer’s name and address
2) Country of manufacture
3) Source for service and technical information
4) Parts replacement information
5) Descriptions, specifications, and ratings of the chassis, pump (if applicable), and aerial device (if applicable)
6) Wiring diagrams for low voltage and line voltage systems to include the following information:
a) Pictorial representations of circuit logic for all electrical components and wiring
b) Circuit identification
c) Connector pin identification
d) Zone location of electrical components
e) Safety interlocks
f) Alternator–battery power distribution circuits
g) Input/output assignment sheets or equivalent circuit logic implemented in multiplexing systems
7) Lubrication charts
8) Operating instructions for the chassis, any major components such as a pump or aerial device, and any
auxiliary systems
9) Precautions related to multiple configurations of aerial devices, if applicable
10) Instructions regarding the frequency and procedure for recommended maintenance
11) Overall apparatus operating instructions
12) Safety considerations
13) Limitations of use
14) Inspection procedures
15) Recommended service procedures
16) Troubleshooting guide
17) Apparatus body, chassis and other component manufacturer’s warranties
18) Special data required by this standard
19) A material safety data sheet (MSDS) for any fluid that is specified for use on the apparatus
The Contractor shall deliver with the apparatus all manufacturer's operations and service documents supplied with
components and equipment that are installed or supplied by the Contractor.
NFPA REQUIRED DOCUMENTATION FORMAT - USB FLASH DRIVE
The vehicle construction details and the operations and service documentation as required per NFPA 1901 latest
edition shall be provided on a USB Flash Drive. These manuals shall be divided into sections for ease of
reference. There shall be two (2) USB flash drives provided with the completed vehicle.










