SVI Trucks Freightliner 4-Door Demo Table of Contents SCOPE AND GENERAL REQUIREMENTS ............................................................................................................. 6 GENERAL CONSTRUCTION AND DESIGN ............................................................................................................ 8 ACCESSIBILITY ........................................................................................................................................................
SVI Trucks Freightliner 4-Door Demo DELIVERY AND DEMONSTRATION ..................................................................................................................... 20 CAB CHASSIS SPECIFICATIONS ......................................................................................................................... 21 CHASSIS MODIFICATIONS ...................................................................................................................................
SVI Trucks Freightliner 4-Door Demo GROUND LIGHTS ................................................................................................................................................... 35 WHEEL WELL EXTERIOR PANEL ........................................................................................................................ 35 DIEFORMED BEADED EDGE BODY FENDERS .................................................................................................. 35 WHEEL WELL LINERS ......
SVI Trucks Freightliner 4-Door Demo CURBSIDE COMPARTMENT - AHEAD OF REAR WHEEL (C2) ......................................................................... 50 COMPARTMENT LAYOUT ..................................................................................................................................... 50 CURBSIDE COMPARTMENT - ABOVE REAR WHEEL (C3) ............................................................................... 51 COMPARTMENT LAYOUT ................................................
SVI Trucks Freightliner 4-Door Demo GENERATOR MOUNTING...................................................................................................................................... 70 MANUALS AND SCHEMATICS ............................................................................................................................. 70 POWER-TAKE-OFF GENERATOR DRIVE ............................................................................................................ 70 LOADCENTER ..............
SVI Trucks Freightliner 4-Door Demo SCOPE AND GENERAL REQUIREMENTS It is the intent of the Fire Department to secure an emergency apparatus to withstand the continuous use encountered in the emergency service. The apparatus shall be of the latest type, symmetrically proportioned and constructed with due consideration of the load to be sustained.
SVI Trucks Freightliner 4-Door Demo The apparatus body manufacturer shall be prime Bidder and shall identify the location of their facility and the number of regular full time employees. A complete history of the Bidder's company shall be supplied in his request for proposal request for proposals are requested from responsible manufacturers who are engaged in the manufacture of emergency apparatus. Fire Department does not request proposals from bankrupt, reorganized or unproven manufacturers.
SVI Trucks Freightliner 4-Door Demo GENERAL CONSTRUCTION AND DESIGN The design of the equipment shall be in accordance with the best engineering practices. The equipment design and accessory installation shall permit accessibility for use, maintenance and service. All components and assemblies shall be free of hazardous protrusions, sharp edges, cracks or other elements which might cause injury to personnel or equipment.
SVI Trucks Freightliner 4-Door Demo QUALITY AND WORKMANSHIP The manufacturing process, including quality control, shall be consistent with present industry standards. All equipment, material, and articles required under these specifications are to be new or fabricated from new materials produced from recovered materials.
SVI Trucks Freightliner 4-Door Demo ENGINEERING DRAWINGS The evaluation of bids shall also be based on design, engineering reliability, and completeness of drawings. No Bidder's proposal shall be considered unless complete engineering drawings to these specifications are submitted with the request for proposal package. Failure to submit factory prepared blueprints with bid shall result in automatic rejection.
SVI Trucks Freightliner 4-Door Demo VEHICLE STABILITY SUPPLIED WITH CAB/CHASSIS The cab/chassis shall be equipped with a stability control system. The system shall have, at a minimum, a steering wheel position sensor, a vehicle yaw sensor, a lateral accelerometer and individual wheel brake controls. FIRE APPARATUS PERFORMANCE The fire apparatus shall meet the requirements of this standard at elevations of 2000 ft (600 m) above sea level.
SVI Trucks Freightliner 4-Door Demo CONSTRUCTION DOCUMENTATION The contractor shall supply, at the time of delivery, at least one (1) copy of the following documents: The manufacturers record of apparatus construction details, including the following information: 1) Owner’s name and address 2) Apparatus manufacturer, model, and serial number 3) Chassis make, model, and serial number a) GAWR of front and rear axles and GVWR b) Front tire size and total rated capacity in pounds (kilograms) c) Rear tire size a
SVI Trucks Freightliner 4-Door Demo OPERATIONS AND SERVICE DOCUMENTATION The Contractor shall deliver with the fire apparatus at least two (2) sets of complete operation and service documentation covering the completed apparatus as delivered and accepted. The documentation shall address at least the inspection, service, and operations of the fire apparatus and all major components thereof.
SVI Trucks Freightliner 4-Door Demo STATEMENTOF EXCEPTIONS The Contractor shall deliver with the fire apparatus either a certification that the apparatus fully complies with all requirements of this standard or alternatively, a Statement of Exceptions specifically describing each aspect of the completed apparatus that is not fully compliant with the requirements of this standard at the time of delivery.
SVI Trucks Freightliner 4-Door Demo TESTING ROAD TEST Road test shall be conducted in accordance with this section to verify that the completed apparatus is capable of compliance with Roadability Section. The tests shall be conducted at a location and in a manner that does not violate local, state or provincial or federal traffic laws. The tests shall be conducted on dry, level, paved roads that are in good condition. The apparatus shall be loaded to its estimated in service weight.
SVI Trucks Freightliner 4-Door Demo 2. ALTERNATOR PERFORMANCE TEST TEST AT IDLE The minimum continuous electrical load shall be activated with the engine running at idle speed. The engine temperature shall be stabilized at normal operating temperature. The battery system shall be tested to detect the presence of battery discharge current. The detection of battery discharge current shall be considered a test failure.
SVI Trucks Freightliner 4-Door Demo UL 120/240 VAC CERTIFICATION The 120/240 volt electrical system shall be third-party, independent, audit-certified through Underwriters Laboratory (UL) to the current edition of NFPA 1901 to perform as listed below; The prime mover shall be started from a cold start condition, and the unloaded voltage and frequency shall be recorded.
SVI Trucks Freightliner 4-Door Demo DOCUMENTATION The Body Manufacturer shall deliver the following with the fire apparatus: The results of each test shall be recorded on an appropriate form and provided with the delivery of the fire apparatus. DIELECTRIC VOLTAGE WITHSTAND TEST The line voltage wiring and permanently connected devices and equipment shall be subjected to a dielectric voltage withstand test of 900 volts for one (1) minute. The testing shall be performed after all body work has been completed.
SVI Trucks Freightliner 4-Door Demo WARRANTY A full statement shall be provided of the warranties for the vehicle(s) being bid. Warranties should clearly describe the terms under which the vehicle manufacturer accepts responsibility for the cost to repair defects caused by faulty design, quality of work or material and for the applicable period of time after delivery. Cost of repairs refers to all costs related thereto including, but not limited to, the cost of materials and the cost of labor.
SVI Trucks Freightliner 4-Door Demo OVERALL HEIGHT The overall height (OAH) of the vehicle shall be approximately “ (9' - 10") from the ground. This measurement shall be taken on flat ground with the tires properly inflated, in the unloaded condition, at that highest point of the vehicle. OVERALL LENGTH The overall length (OAL) of the vehicle shall be approximately 361“ (30' - 1"). OVERALL WIDTH The overall width (OAW) of the body at drip rails shall be 102“ (8' - 6"), and body shall be 100" (8' - 4").
SVI Trucks Freightliner 4-Door Demo CAB CHASSIS SPECIFICATIONS Vehicle Configuration M2 106 CONVENTIONAL CHASSIS 2016 MODEL YEAR SPECIFIED SET BACK AXLE - TRUCK General Service RESCUE AND EMERGENCY SERVICE EMERGENCY VEHICLES BUSINESS SEGMENT MEDIUM TRUCK 2 YEAR WARRANTY EXPECTED FRONT AXLE LOAD: 14000 lbs EXPECTED REAR DRIVE AXLE LOAD: 23000 lbs EXPECTED GROSS VEHICLE WEIGHT CAPACITY : 37000 lbs Engine CUM ISC-350 350 HP @ 2000 RPM; 2200 GOV, 1000 LB/FT @ 1400 RPM Engine Equipment 2013 EPA/CARB EMISSION CER
SVI Trucks Freightliner 4-Door Demo ELECTRIC GRID AIR INTAKE WARMER DELCO 12V 38MT HD STARTER WITH INTEGRATED MAGNETIC SWITCH Transmission ALLISON 3000 EVS 5 SPD AUTOMATIC TRANSMISSION WITH PTO PROVISION Transmission Equipment MAGNETIC PLUGS, ENGINE DRAIN, TRANSMISSION DRAIN, AXLE(S) FILL AND DRAIN PUSH BUTTON ELECTRONIC SHIFT CONTROL, DASH MOUNTED WATER TO OIL TRANSMISSION COOLER TRANSMISSION OIL CHECK AND FILL WITH ELECTRONIC OIL LEVEL CHECK SYNTHETIC TRANSMISSION FLUID (TES-295 COMPLIANT) Front Axle and
SVI Trucks Freightliner 4-Door Demo Rear Suspension AIRLINER 23,000# REAR SUSPENSION SINGLE AIR REAR SUSPENSION LEVELING VALVE TRANSVERSE CONTROL RODS REAR SHOCK ABSORBERS - ONE AXLE (AIR RIDE SUSPENSION) Brake System AIR BRAKE PACKAGE WABCO 4S/4M ABS WITH TRACTION CONTROL NFPA COMPLIANT ENHANCE STABILITY CONTROL BW AD-9 BRAKE LINE AIR DRYER WITH HEATER STANDARD AIR SYSTEM PRESSURE PROTECTION SYSTEM CUSTOM STEEL AIR BRAKE RESERVOIRS BW DV-2 AUTO DRAIN VALVE WITHOUT HEATER - WET TANK Electrical Connections U
SVI Trucks Freightliner 4-Door Demo Cab Exterior 154 INCH BBC HIGH-ROOF ALUMINUM CONVENTIONAL CREW CAB AIR CAB MOUNTS NFPA COMPLIANT EXTERIOR GRAB HANDLES HOOD MOUNTED CHROMED PLASTIC GRILLE CHROMED HOOD MOUNTED AIR INTAKE GRILLE TUNNEL & FIREWALL LINER DUAL 25 INCH ROUND STUTTER TONE HOOD MOUNTED AIR HORNS (1) RH FOOT SWITCH WITH DASH SWITCH FOR HORN BUTTON TO CONTROL AIR HORN, DEFAULT TO ELECTRIC <85 PSI SINGLE ELECTRIC HORN DOOR LOCKS AND IGNITION SWITCH KEYED THE SAME INTEGRAL HEADLIGHT/MARKER ASSEMBLY
SVI Trucks Freightliner 4-Door Demo SEATS INC 911 UNIVERSAL SERIES HIGH BACK AIR SUSPENSION DRIVER SEAT NFPA COMPLIANT SEATS INC 911 UNIVERSAL SERIES HIGH BACK NON SUSPENSION PASSENGER SEAT WITH UNDERSEAT STORAGE NFPA COMPLIANT SEATS INC 911 UNIVERSAL SERIES SCBA NON SUSPENSION LH, RH AND CENTER REAR PASSENGER SEATS WITH UNDERSEAT STORAGE NFPA COMPLIANT LH AND RH INTEGRAL DOOR PANEL ARMRESTS GRAY VINYL SEAT COVERS WITH GRAY CORDURA CLOTH BOLSTERS AND HEADRESTS 3 POINT HIGH VISIBILITY ORANGE RETRACTOR DRIVER
SVI Trucks Freightliner 4-Door Demo Design PAINT: TWO SOLID COLOR Color CAB COLORS: RED FBCH 911659, WHITE FBCH 2185 BLACK, HIGH SOLIDS POLYURETHANE CHASSIS PAINT Weight Summary Factory Weight+ Weight Front Weight Rear Total Weight 7977 LBS 4418 LBS 12395 LBS (+) Weights shown are estimates only.
SVI Trucks Freightliner 4-Door Demo CAB TO AXLE DIMESION Cab to axle will be 118”. CHASSIS MODIFICATIONS LUBRICATION AND TIRE DATA PLATE A permanent label in the driving compartment shall specify the quantity and type of the following fluids used in the vehicle and tire information: Engine oil Engine coolant Chassis transmission fluid Pump transmission lubrication fluid . . (if applicable) Pump priming system fluid, if applicable . .
SVI Trucks Freightliner 4-Door Demo OVERALL HEIGHT, LENGTH DATA PLATE (US) The fire apparatus manufacturer shall permanently affix a high-visibility label in a location visible to the driver while seated. The label shall show the height of the completed fire apparatus in feet and inches, the length of the completed fire apparatus in feet and inches, and the GVWR in pounds.
SVI Trucks Freightliner 4-Door Demo EXHAUST The exhaust system shall be as provided by cab/chassis manufacturer. The tailpipe may require some modifications for proper ground clearances and fit with body. The exhaust piping and discharge outlet shall be located or shielded so as not to expose any portion of the vehicle or equipment to excessive heating. Exhaust pipe discharge shall be directed away from any operator’s position or entry doors on body.
SVI Trucks Freightliner 4-Door Demo SEAT BELT MONITORING AND VEHICLE DATA RECORDER (VDR) SYSTEMS SEAT BELT MONITORING A Weldon 6204 series system with Vista IV display shall be provided and installed to allow the driver to know if all persons seated in the vehicle are secured with seat belts before moving the vehicle. Built-in smart seating logic shall detect if the correct sit and buckle sequence is not followed for all seats. System shall also provide an output for an external alarm.
SVI Trucks Freightliner 4-Door Demo CAB CRASH TEST CERTIFICATION A cab crash test certification from the fire apparatus manufacturer shall be provided with the equipment. A copy of this certification shall be included with the bid. NOTE: There shall be no exception to any portion of the cab integrity certification requirements. Nonconformance shall lead to immediate rejection of bid.
SVI Trucks Freightliner 4-Door Demo BODY DESIGN The importance of public safety associated with emergency vehicles requires that the construction of this vehicle meet the following specifications. These specifications are written to establish the minimum level of quality and design. All Bidders shall be required to meet these minimum requirements. It is the intent of these specifications to fully describe the requirements for a custom built emergency type vehicle.
SVI Trucks Freightliner 4-Door Demo EXTERIOR ALUMINUM BODY The fabrication of the body shall be constructed from aluminum 3003H-14 alloy smooth plate. This shall include compartment front panel, vertical side sheets, side upper rollover panels, rear panels and compartment door frames. The body compartment floors and exterior panels shall be constructed with not less than 3/16" (.187) aluminum 3003H-14 smooth plate. Interior compartment dividing walls shall be constructed with not less than 1/8" (.
SVI Trucks Freightliner 4-Door Demo ROOF CONSTRUCTION The roof shall be integral with the body and shall be all welded construction. The roof of the body shall not be less than 3/16" aluminum 3003H-14 alloy tread plate, fully and continuously welded. The roof shall be reinforced with 2" x 2" x 1/4" aluminum tubing running the full width of the body. All seams in the roof area shall be welded to the radius and supports prior to paint to prevent entry of moisture. All roof seams shall be continuously welded.
SVI Trucks Freightliner 4-Door Demo GROUND LIGHTS There shall be two (2) OnScene 9" Night Axe LED lights installed below bumper capable of providing illumination at a minimum level of 2 fc (20 lx) on ground areas within 30 in. (800 mm) of the edge of the vehicle in areas designed for personnel to climb onto or descend from the vehicle to the ground level. Lighting shall be switchable but activated automatically when the vehicle park brake is set.
SVI Trucks Freightliner 4-Door Demo BODY PAINT SPECIFICATIONS BODY PAINT PREPARATION After the body and components have been fabricated they shall be disassembled prior to painting so when the vehicle is complete there shall be finish paint beneath the removable components. The body shall be totally removed from chassis during the paint process to insure the entire unit is covered. The body and components shall be metal finished as follows to provide a superior substrate for painting.
SVI Trucks Freightliner 4-Door Demo FASTENERS Prior to the assembly and reinstallation of exterior components; i.e. warning and DOT lights, handrails, steps, door hardware, and miscellaneous items, an isolation tape, or gasket shall be used to prevent damage to the finish painted surfaces.
SVI Trucks Freightliner 4-Door Demo REFLECTIVE STRIPE REQUIREMENTS Material All retroreflective materials shall conform to the requirements of ASTM D 4956, Standard Specification for Retroreflective Sheeting for Traffic Control, Section 6.1.1 for Type I Sheeting. All retroreflective materials used that are colors not listed in ASTM D 4956, Section 6.1.1, shall have a minimum coefficient of retroreflection of 10 with observation angle of 0.2 degrees and entrance angle of -4 degrees.
SVI Trucks Freightliner 4-Door Demo REFLECTIVE STRIPE - BODY SIDES The reflective stripe material shall be 6" wide, 3M Scotchcal 680 series. This reflective stripe shall be white in color. The stripe shall remain in a straight line from the front of the front of cab to the rear body.
SVI Trucks Freightliner 4-Door Demo EXTERIOR COMPARTMENT DOORS ROLL-UP DOOR CONSTRUCTION - ROBINSON (ROM) The apparatus shall be equipped with Robinson ROM Series III roll-up exterior compartment doors.
SVI Trucks Freightliner 4-Door Demo ROM DOOR BOTTOM RAIL All exterior compartment doors shall have the standard 3.0" tall bottom rail extrusion for easy one (1) hand opening and closing. The specified retroreflective stripe material shall be applied on the roll-up compartment doors. The stripe shall be precision machine cut for each door slat of the roll-up doors. Under no circumstance will the stripe material be cut on roll-up door surface.
SVI Trucks Freightliner 4-Door Demo STREETSIDE COMPARTMENT - FRONT (S1) The interior useable compartment width shall be approximately 41.0" wide. The compartment door opening shall be approximately 34.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo One (1) Hannay ECR1616-17-18 electric cable reel(s) capable of storing 150' of 10/3 electric cable. Reel(s) shall be designed to hold 110% of the capacity of cord length, with fully enclosed 45 amp, three (3) conductor collector rings. Reel(s) shall be mounted to channel structure that allows for side-to-side adjustment of reel position. Power rewind control(s) shall be in a position where the operator can observe the rewinding operation and not be more than 72 in.
SVI Trucks Freightliner 4-Door Demo STREETSIDE COMPARTMENT - AHEAD OF REAR WHEELS (S2) The interior useable compartment width shall be approximately 41.0" wide. The compartment door opening shall be approximately 34.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo There shall be one (1) transverse module fabricated from 3/16” (.188) 3003H-14 aluminum alloy smooth sheet. The module will be designed for the following long tools and equipment: One (1) Fire Department supplied stokes basket(s). Manufacturer, model number and dimensions of the stokes basket(s) shall be provided during the pre-construction meeting. Two (2) Fire Department supplied backboard(s).
SVI Trucks Freightliner 4-Door Demo STREETSIDE COMPARTMENT - ABOVE REAR WHEELS (S3) The interior useable compartment width shall be approximately 59.0" wide. The compartment door opening shall be approximately 52.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo STREETSIDE COMPARTMENT - REAR (S4) The interior useable compartment width shall be approximately 49.0" wide. The compartment door opening shall be approximately 42.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo CURBSIDE COMPARTMENT - FRONT (C1) The interior useable compartment width shall be approximately 41.0" wide. The compartment door opening shall be approximately 34.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo One (1) Hannay ECR1616-17-18 electric cable reel(s) capable of storing 150' of 10/3 electric cable. Reel(s) shall be designed to hold 110% of the capacity of cord length, with fully enclosed 45 amp, three (3) conductor collector rings. Reel(s) shall be mounted to channel structure that allows for side-to-side adjustment of reel position. Power rewind control(s) shall be in a position where the operator can observe the rewinding operation and not be more than 72 in.
SVI Trucks Freightliner 4-Door Demo CURBSIDE COMPARTMENT - AHEAD OF REAR WHEEL (C2) The interior useable compartment width shall be approximately 41.0" wide. The compartment door opening shall be approximately 34.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo CURBSIDE COMPARTMENT - ABOVE REAR WHEEL (C3) The interior useable compartment width shall be approximately 59.0" wide. The compartment door opening shall be approximately 52.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo CURBSIDE COMPARTMENT - REAR (C4) The interior useable compartment width shall be approximately 49.0" wide. The compartment door opening shall be approximately 42.0" wide. This compartment shall have a ROM roll-up door. The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
SVI Trucks Freightliner 4-Door Demo REAR COMPARTMENT - CENTER (RC1) The rear center compartment shall be closed to both side rear compartments. The rear center compartment shall begin just above the bumper height and be as high as the side compartments, unless specified otherwise. The body sub-frame shall extend at least 20" into the compartment to allow for the spring loaded body mounts. Compartment shall be as deep as possible below sub-frame to maximize storage.
SVI Trucks Freightliner 4-Door Demo One (1) OnScene 64" Access LED compartment light, vertically mounted. There shall be one (1) 240 VAC outlet(s) located in compartment mounted on the forward wall. The outlet receptacle(s) shall be 30 amp, twist-lock (NEMA L6-30R). Outlet(s) shall be powered through the on-board generator system.
SVI Trucks Freightliner 4-Door Demo PLASTIC FLOOR AND SHELF TILE All compartment floors, shelves, and trays shall be covered with Turtle Tile plastic interlocking grating. The plastic floor tile shall be red. The plastic edge trim shall be red. SIDE BODY PROTECTION - RUB RAIL OnScene Solutions rub rails shall be provided below the compartment door openings on both the streetside and curbside.
SVI Trucks Freightliner 4-Door Demo LOW VOLTAGE ELECTRICAL SYSTEM- 12 VDC General Any low voltage electrical systems or warning devices installed on the fire apparatus shall be appropriate for the mounting location and intended electrical load. Where wire passes through sheet metal, grommets shall be used to protect wire and wire looms. Electrical connections shall be with double crimp water-tight heat shrink connectors.
SVI Trucks Freightliner 4-Door Demo If a mechanical-type device is used, it shall conform to one of the following SAE standards: SAE J156, Fusible Links SAE J553, Circuit Breakers SAE J554, Electric Fuses (Cartridge Type) SAE J1888, High Current Time Lag Electric Fuses SAE J2077, Miniature Blade Type Electrical Fuses Switches, relays, terminals, and connectors shall have a direct current (dc) rating of 125 % of maximum current for which the circuit is protected.
SVI Trucks Freightliner 4-Door Demo Electromagnetic Interference Electromagnetic interference suppression shall be provided, as required, to satisfy the radiation limits specified in SAE J551/1, Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz). Wiring Diagram A complete electrical wiring schematic of actual system shall be provided with finished apparatus.
SVI Trucks Freightliner 4-Door Demo 12 VOLT MULTIPLEX CONTROL CENTER The apparatus shall be equipped with a Weldon V-MUX multiplexed 12 volt electrical system that will provide complete diagnostic capability, No Exception. The system shall have the capability of delivering multiple signals via a CAN bus, utilizing specifications set forth by SAE J1939. The system shall be node based to maximize stability so that failure of one node does not affect the operation of the other nodes.
SVI Trucks Freightliner 4-Door Demo Displays: Displays shall be able to provide real time information regarding load shedding and system status, such as network traffic/errors or shorts and open circuits. System Network: The multiplex system shall contain a Peer-to-Peer network. A Master Slave Type network is not suitable for this type of unit. A Peer-to-Peer network means that all the modules are equal on the network; a Master is not needed to tell other nodes when to talk, No Exceptions.
SVI Trucks Freightliner 4-Door Demo BATTERY SYSTEM The battery connectors shall be heavy duty type with cables terminating in heat shrink loom. Heavy duty battery cables shall provide maximum power to the electrical system. Where required, the cables shall be shielded from exhaust tubing and the muffler. Large rubber grommets shall be provided where cables enter the battery compartment. Batteries shall be of the high-cycle type.
SVI Trucks Freightliner 4-Door Demo One (1) Kussmaul 120 VAC, 20 amp Super Auto-Eject shore power inlet(s) shall be provided. The shore power connection shall automatically disengage from vehicle when chassis ignition is engaged. The protective ground from the shoreline inlet shall be bonded to the vehicle frame. The outlet cover shall be yellow. The shore power plug shall be located near the Driver door area.
SVI Trucks Freightliner 4-Door Demo Rear body tail lights shall be vertically mounted and located per Federal Motor Vehicle Safety Standards, FMVSS and Canadian Motor Vehicle Safety Standards CMVSS.
SVI Trucks Freightliner 4-Door Demo TRAFFIC ADVISOR LIGHT The Traffic Advisor shall be comprised of six (6) Whelen 500 Series TIR6 Super LED lights, individually mounted with chrome bezels to the rear face of the apparatus and evenly distributed, if split by a hose bed, or walkway. The lights shall be amber with a clear lens and controlled by the multiplexing system and provide Left Arrow, Right Arrow, Center Out and Wig-Wag patterns.
SVI Trucks Freightliner 4-Door Demo WARNING LIGHT PACKAGE Each apparatus shall have a system of optical warning devices that meets or exceeds the requirements of this section. The optical warning system shall consist of an upper and a lower warning level. The requirements for each level shall be met by the warning devices in that particular level without consideration of the warning devices in the other level.
SVI Trucks Freightliner 4-Door Demo UPPER LEVEL OPTICAL WARNING DEVICES The upper-level optical warning devices shall be mounted as high and as close to the corner points of the apparatus as is practical to define the clearance lines of the apparatus. The upper-level optical warning devices shall not be mounted above the maximum height, specified by the device manufacturer. ZONE A - FRONT WARNING LIGHTS There shall be one (1) Whelen Edge FN60QLED LED 60" lightbar permanently mounted to the cab roof.
SVI Trucks Freightliner 4-Door Demo ZONES B AND D - SIDE WARNING LIGHTS UPPER REAR CORNER WARNING LIGHTS There shall be two (2) Whelen M9 V-Series Red Super LED warning lights (M9V2R) with built-in lower LED scene light provided, one (1) each side. Each light shall have a red lens and chrome flange. The lights shall be switched at the Vista display in the cab.
SVI Trucks Freightliner 4-Door Demo LOWER LEVEL OPTICAL WARNING DEVICES To define the clearance lines of the apparatus, the optical center of the lower-level optical warning devices in the front of the vehicle shall be mounted on or forward of the front axle centerline and as close to the front corner points of the apparatus as is practical.
SVI Trucks Freightliner 4-Door Demo LINE VOLTAGE ELECTRICAL SYSTEM ONAN PTO GENERATOR The vehicle shall be equipped with an Onan Protec PTO generator system with a capacity of 15,000 watts at 120/240 VAC, 125/62 amps, single phase. Current frequency shall be stable at 60 hertz.
SVI Trucks Freightliner 4-Door Demo GENERATOR SPLASH GUARD A powder coat painted splash cover shall be installed to reduce the amount of road spray on the frame mounted PTO generator. A V-ring seal shall also be installed in the cover to provide additional protection against contaminates reaching the generator front seals. The generator shall be engaged at the 12 volt control panel in the cab. GENERATOR MOUNTING The generator shall be mounted between the chassis frame rails.
SVI Trucks Freightliner 4-Door Demo LOADCENTER The loadcenter shall be a Cutler Hammer, BR Series, specifically designed for protection and distribution of 120/240 volt AC, such as lighting and small motor branch circuits. The loadcenter enclosure shall be made of 16 gauge galvanized sheet steel. The galvanized coating provides corrosion protection and as such does not require paint.
SVI Trucks Freightliner 4-Door Demo LINE VOLTAGE ELECTRICAL SYSTEM GENERAL REQUIREMENTS Stability Any fixed line voltage power source producing alternating current (ac) shall produce electric power at 60 Hz, ±3 Hz when producing power at all levels between no load and full rated power. Any fixed line voltage power source shall produce electric power at the rated voltage ±10 percent when producing power at all levels between no load and full rated power.
SVI Trucks Freightliner 4-Door Demo Bonding The neutral conductor of the power source shall be bonded to the vehicle frame. The neutral bonding connection shall occur only at the power source. In addition to the bonding required for the low voltage return current, each body and each driving or crew compartment enclosure shall be bonded to the vehicle frame by a copper conductor. The conductor shall have a minimum amperage rating, as defined in 310.
SVI Trucks Freightliner 4-Door Demo Instrumentation If the power source is rated at less than 3 kW, a “Power On” indicator shall be provided. If the power source is rated at 3 kW or more but less than 8 kW, a voltmeter shall be provided.
SVI Trucks Freightliner 4-Door Demo Overcurrent Protection Manually resettable over current devices shall be installed to protect the line voltage electrical system components. Power Source Protection A main over current protection device shall be provided that is either incorporated in the power source or connected to the power source by a power supply assembly.
SVI Trucks Freightliner 4-Door Demo Wiring Methods Fixed wiring systems shall be limited to the following: 1) Metallic or nonmetallic liquid tight flexible conduit rated at temperatures not less than 194°F (90°C) with stranded copper wire rated for wet locations and temperatures not less than 194°F (90°C) 2) Type SOW, SOOW, SEOW, or SEOOW flexible cord rated at 600 V and at temperatures not less than 194°F (90°C) Electrical cord or conduit shall not be attached to chassis suspension components, water or fue
SVI Trucks Freightliner 4-Door Demo Wiring System Components Only stranded copper conductors with an insulation rated for temperatures of at least 194°F (90°C) and wet locations shall be used. Conductors in flexible cord shall be sized in accordance with Table 400.5(A) of NFPA 70. Conductors used in conduit shall be sized in accordance with 310.15, “Ampacities for Conductors Rated 0–2000 Volts,” of NFPA 70. Aluminum or copper-clad aluminum conductors shall not be used.
SVI Trucks Freightliner 4-Door Demo Wiring Schematics An "As-Built" Wiring diagrams for line voltage systems shall be provided to include the following information; 1) 2) 3) 4) 5) 6) 7) Pictorial representations of circuit logic for all electrical components and wiring Circuit identification Connector pin identification Zone location of electrical components Safety interlocks Alternator–battery power distribution circuits Input/output assignment sheets or equivalent circuit logic implemented in multiplexin
SVI Trucks Freightliner 4-Door Demo 120/240 VAC SCENE LIGHTING LIGHT TOWER One (1) Command Light Knight 2, KL Series light tower(s) shall be provided and installed on the completed unit. A flashing warning light shall be provided in cab, indicating when a light tower is not in nested position as required by NFPA 1901. The Command Light shall be covered by a five (5) year limited warranty from defects in materials and workmanship.
SVI Trucks Freightliner 4-Door Demo Light Tower Backlight Option A backlight option shall be provided on the light tower. The lower pair of light heads shall be capable of being rotated about a horizontal axis 180 degree, providing light down on the vehicle or to the opposite side of the vehicle while allowing the fixed lights to remain pointed at the scene. The hand-held remote control shall have an additional switch supplied for the backlight rotation option.
SVI Trucks Freightliner 4-Door Demo EQUIPMENT PAYLOAD WEIGHT ALLOWANCE In compliance with NFPA 1901 standards, the special service vehicle shall be designed for an equipment loading allowance of 4,000 lbs. of Fire Department provided equipment based on a 30,001 - 40,000 pound gross vehicle weight rating.
