Specifications

ST. PETERSBURG FIRE & RESCUE

AIR / LIGHT APPARATUS

SVI #865 PRODUCTION SPECIFICATION

SVI #865 04/26/13

− One (1) Hannay ECR1616-17-18 electric cable reel(s) capable of storing 150' of 10/3 electric cable. Reel(s) shall be

designed to hold 110% of the capacity of cord length, with fully enclosed 45 amp, three (3) conductor collector rings.

Reel(s) shall be mounted to channel structure that allows for side-to-side adjustment of reel position.

− Power rewind control(s) shall be in a position where the operator can observe the rewinding operation and not be

more than 72 in. (1830 mm) above the operator’s standing position, and shall be marked with a label indicating its

function.

• A label shall be provided in a visible location adjacent to reel with following information: Current rating, Current

type, Phase, Voltage, and Total cord length.

− The cable reel shall equipped with 150' of 10/3 SEOW yellow cable, a molded plastic ball clamp, and a single

heavy duty L5-30 twist-lock female plug at the end.

SHOP NOTES

There shall be a label at each reel stating: "FAN MUST PLUG DIRECTLY IN TO CORD REEL"

− One (1) Akron model EJB series, cast aluminum electrical power distribution box with yellow powder coat painted

finish shall be provided. The power distribution box shall meet all requirements described in NFPA 1901. The power

distribution box shall include the following outlets mounted on a backlit face plate;

− A 12" pigtail that terminates in an L5-30 configuration to match the cable on the cord reel. The outlet configuration

shall include:

• One (1) L5-20 single twist lock receptacle

− One (1) L5-20 single twist lock receptacle

− One (1) Akron EJB treadplate vertical apparatus mounting bracket shall be provided.

SHOP NOTES

Junction box shall be mounted on the shelf below the electric reel.

− The fairlead roller shall be mounted directly to the reel.

• Two (2) OnScene 64" Access LED compartment lights, vertically mounted.