Specifications

ST. PETERSBURG FIRE & RESCUE

AIR / LIGHT APPARATUS

SVI #865 PRODUCTION SPECIFICATION

SVI #865 04/26/13

OCCUPANT RESTRAINT INDICATOR

The occupant restraint indicator shall have the following features;

• Supports commercial and custom cab seating layouts; up to 12 seats

• Built-in audible alarm

• Use in conjunction with Vehicle Data Recorder (VDR)

STORAGE MODULE

A storage module shall be provided in the cab. The module shall be as large as possible and fabricated of 1/8" smooth

aluminum. A textured powder coat paint finish shall be provided for durability and finished appearance. The paint shall

match the interior cab color.

The final design and location of console shall be determined by the St. Petersburg Fire and Rescue at the pre-

construction meeting.

IGNITION KEY

If the vehicle is specified to have an ignition key it will be attached to steering column or dash with vinyl covered steel

cable.

SIX (6) – LED TIRE PRESSURE VISUAL INDICATORS

Each tire shall be equipped with a VECSAFE heavy duty valve cap (or equal) LED indicator that indicates proper tire

pressure.

TIRE PRESSURE PLACARDS

There shall be one (1) placard placed above each wheel for a total of four (4) placards. The placards shall have the

correct tire pressure information for its respective tire.

CAB CRASH TEST CERTIFICATION

A cab crash test certification from the fire apparatus manufacturer shall be provided with the equipment. A copy of this

certification shall be included with the bid.

NOTE: There shall be no exception to any portion of the cab integrity certification requirements. Nonconformance shall

lead to immediate rejection of bid.

The certification shall state that the cab does meet or exceed the requirements below:

• European Occupant Protection Standard ECE Regulation No. 29.

• SAE J2422 Cab Roof Strength Evaluation - Quasi-Static Loading Heavy Trucks.