Technical data

be connected. To get the complete unit list, the CONNECT command
must be used with no parameter. The list of units in the Point-to-
Point link with established connection with a remote unit is shown in
Figure B-2:
Where the Product column show the factory configuration number
loaded into the unit and Serial Number column shows its unique se-
rial umber.
To connect to the local unit, the parameter (Unit_Numb) must be
equal to 1.
B.9 X
MOD
The XMOD command activates the X-Modem mode that is used by
system operator to load a factory configuration or update a firmware
image.
XMOD [Loading] [/?]
The Loading specifies a file being loaded:
• IMAGE – intended to load an updated firmware image (can be
used in the field by end-user);
• FACTIMG – intended to load a factory firmware image (hidden
command used only in production);
• DFCFG – intended to load a factory configuration (hidden
command used only in production);
• CFGUP – intended to upload the radio configuration, which
includes the factory and user-defined configuration (hidden
command used by AWare application only);
• CFGDN – intended to download the radio user configuration
(hidden command used by AWare application only).
Unit Product Serial Number Connect
1 UK00425 003578659922
2 UK00425 003574459923 C
Figure B-2: Connection List
AlphaWave Users Manual 3/21/2005
Page B-7
Appendix B