Technical data

AlphaWave Users Manual 3/21/2005
Page B-3
B.1 C
ONVENTION
The following convention is implemented in the Alpha-Wave Com-
mand Line Interface (CLI):
• The Carriage Return/Line Feed (CR/LF, 0x0D/0x0A) is a com-
mand delimiter.
• The Carriage Return/Line Feed (CR/LF, 0x0D/0x0A) followed
by the “CLI> ” prompt is a reply delimiter.
• An error in the command is replied by a list of available com-
mands (see also section 0).
• An error in the in the command’s parameters is replied by a
command usage.
• A command followed by “/?” displays a command usage.
• A command with the certain [Parameter Name] and blank
[Parameter List] displays the current settings for a given pa-
rameter.
• A command with the blank [Parameter Name] and
[Parameter List] displays the current settings for all parame-
ters.
B.2 H
ELP
The HELP command types the list of all available commands:
AW Radio
Command Line Interface
LINK
RF Link Operation Mode
FREQ Frequency Assignment
DPORT Data Port Configuration
MPORT Maintenance Port Configuration
ALARM Alarm Indication and Alarm Control Configuration
SLEEP Sleep Mode Configuration
CONNECT Managed Unit Connection
XMOD X-Modem mode
STATE Display Status and Statistics
EVENT Display List of Events
BOOT Reboot the unit
SAVE Save Current Configuration into Configuration File
[COMMAND] /? Display Command Usage
HELP Display this usage
Figure B-1: Command Line Interface Usages
Appendix B