Technical data

AlphaWave Users Manual 3/21/2005
− Activate by internal real-time clock
− Activate through RTS/CTS lines
− Activate by external sense lines
− Activate by any combination of the parameters men-
tioned before
The CLI commands also provide filing operations, which include:
• Downloading
− Unit’s Configuration files
− Software Images
• Uploading Unit’s Configuration files
• Saving into the configuration files the configuration parame-
ters modified through the CLI.
There are a few commands hidden from the end-user to support the
test utilities offered by AWare and Pocket AWare software applica-
tions. Another set of hidden CLI commands is intended to facilitate
the unit’s troubleshooting in production and repair centers.
8.2.1 C
OMMAND LINE INTERFACE CONVENTION
The following convention is implemented in AlphaWave Command
Line Interface (CLI):
• An error in the command will be replied by a list of available
commands (see also section 4.2.2).
• An error in the in the command’s parameters will be replied
by a command usage.
• A command followed by “/?” will display a command usage.
• A command with the certain [Parameter Name] and blank
[Parameter List] will display the current settings for a given
parameter.
A command with the blank [Parameter Name] and [Parameter List]
will display the current settings for all parameters.
Note: The unit’s configuration that is set or modified through the
CLI will be lost after unit’s reboot, unless the saving opera-
tion is used to store a new setting in the unit’s configura-
Page 8-2
Chapter 8