Technical data

EMISSIONS
FCC FCC Part 15
ETSI 300-113
Industry Canada RSS-210
N
OTICE
Changes or modifications not expressly approved by ArWest Com-
munications Corporation could void the user’s authority to operate
this equipment.
Shielded cable must be used with this equipment in order to ensure
that it meets the emissions limits for which it was designed. It is
the responsibility of the user to obtain and use good quality shielded
cables with this device. Shielded cables are available from most re-
tail and commercial suppliers of cables designed to work with radio
equipment and personal computer peripherals.
406.0
TO 406.1 MHZ OPERATION
The frequency band from 406.0 to 406.1 MHz is reserved for use by
distress beacons. As such AW400 should not be programmed to
transmit on any frequency within this band. Caution should be used
when programming frequencies into the AW400 to eliminate the pos-
sibility of AW400 users interfering with rescue operations in this
band (US only).
S
AFETY WARNING
In order to ensure the safe operation of this radio equipment, the
following practices should be observed.
DO NOT operate radio equipment near electrical blasting caps or in an
explosive atmosphere
DO NOT operate any radio transmitter unless all RF connectors are
secure and any open connectors are properly terminated.
DO NOT allow the antenna to come close to, or touch, the eyes, face,
or any exposed body parts while the radio is transmitting.
Page—vi
AlphaWave Users Manual 3/21/2005