Technical data

AlphaWave Users Manual 3/21/2005
• Refresh – starts the Spectrum Analyzer test procedure on the
unit.
Figure 6-1: Spectrum Analyzer Dialog Box
To activate Spectrum Analyzer dialog box:
1. Select a unit name (icon) from the Site View pane.
2. Select the Tools > Test Kit > Spectrum Analyzer item of
AWare main menu bar.
6.1.2. BERT
The BERT test is developed to test the wireless link quality in the
network. It provides the BER statistics measured by a built-in test
sequence generator.
The transmit output power level of the AlphaWave units is user se-
lectable. The power level must provide the intact data transmission
with minimal influence on other radio systems. The BERT test is also
intended to estimate the quality of received radio signal depending
on Transmit Power.
There are two states for this test: Transmit or Receive. By selecting
Page 6-2
Chapter 6