Technical data

Hardware - (RTS/CTS) flow control;
Xon/Xoff – flow control is performed by software;
None – flow control is not used.
Figure 5-8: Data Port Properties Tab
5.4.2 MAINTENANCE PORT PROPERTIES
From the Port tab of Unit Configuration dialog box the operator can
configure the maintenance port parameters:
• Baud Rate – indicates the operating rate for the maintenance
port (300 bps to 115 kbps). The “Auto” operating option does
not define the data rate specifically. In this mode on, the baud
rate is automatically detected using the maintenance com-
mands as the key words.
• Byte Size – number of bits in the bytes transmitted and re-
ceived.
Page 5-11
AlphaWave Users Manual 3/21/2005
Chapter 5