Technical data

Figure 5-7: Alarm Properties Tab
5.4 SERIAL PORT FEATURES PROPERTIES
This menu item helps to configure radios’ service features such as
the user data port and maintenance port settings.
5.4.1 D
ATA PORT PROPERTIES
From the Port tab of Unit Configuration dialog box the operator can
configure the following data port parameters:
• Baud Rate – indicates the operating rate for the data port
(300 bps to 115 kbps). The “MP Baud Rate” operating option
does not define the data rate specifically. In this mode on, the
same data rate is used for both maintenance commands and
user data. The baud rate is defined by Maintenance Port set-
tings or automatically detected when the serial port operates
as a Maintenance Port.
• Parity Scheme – for enable/disable parity checking, can be
one of the following settings: none, odd, even.
• Byte Size – number of bits in the bytes transmitted and re-
ceived
• Flow Control – This field indicates the Data Port flow control
option:
Page 5-10
AlphaWave Users Manual 3/21/2005
Chapter 5