Technical data

corresponding channels. AWare displays the list of available carrier
frequencies based on information from the specific unit profile file.
Figure 5-5: Link Frequency Properties Tab
Two buttons under Update Form group helps to update the list of
frequencies from saved dealer configuration or directly upload from
the unit.
5.3 MODEM FEATURES PROPERTIES
This menu item helps to configure radios’ service features such as
the alarm indication mode and alarm control lines’ behavior, and the
sleep mode.
5.3.1 M
ODEM SLEEP PROPERTIES
The Sleep check box enables the sleep mode. The unit with the en-
abled sleep mode goes to sleep if there is no activity on the wireless
link during waiting time defined by Wait edit box (range 10 – 2550
ms).
The sleeping AlphaWave unit can be activated again by the real-time
CLK, DTR/RTS lines, and command received through TTL inputs. The
operator can select one, two, or all three conditions:
Page 5-7
AlphaWave Users Manual 3/21/2005
Chapter 5