Technical data

4.3.2 OPEN A USER SETTING PROFILE
The full path of the User Setting Profile last used is stored in the sys-
tem registry. The program automatically opens that profile after
starting up when corresponding option is selected in the AWare pref-
erences dialog box.
Choosing the “Open” menu item in “File” menu opens the File Open
dialog box. This is where the chosen profile is loaded. Then the pro-
gram automatically loads the newly chosen profile.
4.3.3 S
AVE A USER SETTING PROFILE
To store the current user settings, the “Save” and “Save As” are be-
ing used. “Save As” menu item opens “Save File” dialog box, which
allows an operator to store the current user settings into the differ-
ent file.
4.3.4 A
DD A UNIT INTO PROFILE
By selecting this menu item, the program adds Remote/Secondary
units into the Profile. A unique name and serial number of all zeros
specified for newly added unit. From this point the operator is able
to set the unit specific parameters or change the cluster parameters
for all units. The newly added into profile unit has the factory default
user settings.
4.3.5 D
ELETE A UNIT FROM PROFILE
The Delete Unit Menu item deletes the unit from the User Setting
Profile. The delete operation can not be performed on the root item
in the Site View configuration tree, as long as the configuration of
the rest of all units is based on the root item’s unit.
4.3.6 S
ELECT A LOCAL UNIT
The “Local Unit” menu item specifies the unit that locally connected
to the PC through the Serial Interface. This option used by AWare to
substitute the Serial Number automatically (if last one is all zeros)
with the serial number of locally connected unit during download
process. The green icon will indicate local unit in the Profile Tree.
Page 4-6
AlphaWave Users Manual 3/21/2005
Chapter 4