Technical data

tion parameters into the unit through the serial interface.
The “Factory Configuration” sub-menu of “Tools” menu provides an
access to the tools intended for the unit calibration. “Factory Con-
figuration” sub-menu contains the following items (Figure 3-9):
Figure 3-9: Factory Configuration Sub-menu
• Export Factory Configuration – save dealer configuration into
the file on the disk. The New Profile dialog box uses this file to
choose the dealer configuration as basis for network profile.
• Import Factory Configuration – load Factory Configuration file
into the system for editing it. The “Import Dealer Configuration”
menu item also substitute dealer configuration file in the profile
that currently active in AWare.
• Download Factory Configuration – download Factory Configu-
ration parameters into the unit through the serial interface.
• Calibration Kit – provides access to the unit calibration tools
(see section 6.3).
3.2.11 PERFORMANCE MENU
The Performance Menu is intended to retrieve the statistics from the
unit and present the retrieved information in graphical formats:
Page 3-10
AlphaWave Users Manual 3/21/2005
Chapter 3