Installation guide

Aruba AP-130 Series Access Point | Installation Guide 11

Product Specifications

Mechanical

 Dimensions (antenna stowed) (HxWxD):

 6.69 inches x 6.69 inches x 1.77 inches

 17.0 cm x 17.0 cm x 4.5 cm

 Weight: 1.68 lbs/760 g

 Shipping Dimensions:

 11.22 inches x 9.45 inches x 2.76 inches

 28.5 cm x 24.0 cm x 7.0 cm

 Temperature:

 Operating: 0ºC to 50ºC (32ºF to 122ºF)

 Storage: -40ºC to 70ºC (-40ºF to 158ºF)

 Relative Humidity: 5% to 95% non-condensing

 Mounting:

 Ceiling (with included adapter)

 Wall (with adapter, sold separately)

 Antennas:

 6 integrated antenna elements (AP-135)

 3 RP-SMA interfaces for external antennas (AP-134)

 Visual Status Indicators (LEDs): See Table 3

Electrical

 Ethernet:

 2 x 10/100/1000 Base-T auto-sensing Ethernet RJ-45 Interfaces

 MDI/MDX

 IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)

 Power over Ethernet (IEEE 802.3at compliant), 48V DC/350mA (see Table 1 on page 9 for pin

configuration)

 Power:

 12 VDC power interface, supports powering through an AC-to-DC mains electric power adapter

 POE support on Ethernet ports:

– 802.3at-compliant POE sourcing devices

Operating temperature range is reduced to 0ºC to 40ºC (32ºF to 104ºF) when this AP is used in conjunction with the

Sunny SYS1357-1812 power adapter.

If a power adapter other than the one provided by Aruba Networks is used in the US or Canada, it should be cULus

(NRTL) Listed, with an output rated 12VDC, minimum 1.25A, marked “LPS” or “Class 2,” and suitable for plugging

into a standard power receptacle in the US and Canada. For information on approved power adapters, go to