Specifications

Issues and Limitations Fixed in this
Release
The following issues and limitations from 2.4.0.0 have been fixed in this release:
Authentication
 The user entry created on the Home Agent (HA) does not display the correct
Location, Roaming, ESSID/BSSID/Phy values. However, this is a display-
only issue and the correct values are being enforced. (6151)
 If trim-fqdn is enabled for 802.1x server, the domainname portion for the
FQDN is still passed to the RADIUS server by the client internal EAP
module. (6898)
 The management authentication default role no longer displays as guest in
the CLI but as root in the WebUI. (8161)
 The show station table output is no longer empty when there are a large
number of entries. (8266)
 Wired 802.1x no longer fails to authenticate users when mobility is enabled
and a role-based VLAN is configured. (8508)
CLI
 Database synchronization no longer fails with a small timeout value when the
database size is large. (8251)
Certificate
 When uploading a certificate while using a non-supported browser, you will
no longer receive a message that the document contains no data.
However, Aruba recommends that you only use Internet Explorer as your
browser. (7928)
Licensing
 When a license key is installed, the system will inform the user that a reboot
is necessary to enable the feature associated with the key. The license table
now shows that a reboot is required by marking the installed key with an R
flag. (7845)
Platform
 APs are now consistently deleted from the show ap registered list. (7983)
 Active AP now shows coverage on its floor. (8024)
 The Aruba Wired 2E enet 1 tunnel is now being added to the new VLAN
upon changing the native VLAN configuration of enet1 in trunk mode. (7977)
ArubaOS 2.4.1.0 Part 0500116-01 2
Release Notes June 2005