Specifications

Boot to your default.cfg file.

# boot config

default.cfg

Replace the current WMS database file with your backup.

If you have your backup database file on an external TFTP server, use the

following commands to import it:

copy tftp:

flash: <wms filename>

# wms import-db <wmsfilename>

If no backup image is present, load one:

# copy tftp: <server address> <image filename> system:

partition {0|1}

Select the backup partition as the new boot partition:

# boot system partition {0|1}

Reboot the switch:

# reload

When the boot process is complete, verify that the switch is using the correct

software:

# show version

Note— When reverting from ArubaOS 2.4.1.0 to AirOS 2.2.3.0 or earlier, all

virtual APs that were provisioned in release 2.4.1.0 will have to be

reprovisioned.

ArubaOS 2.4.1.0 Part 0500116-01 18

Release Notes June 2005