Specifications

(aruba) # copy flash: default.cfg tftp: <TFTP server IP address> <dest. filename>
Note— A valid IP route must exist between the TFTP server and the Mobility
Controller. Also required, a placeholder file with the destination filename
and proper write permissions must exist on the TFTP server prior to
executing the copy command.
Backup your current WMS and local user databases.
Use the following commands to export the Mobility Controller’s internal
databases to an internal file with the filename of your choice, and then to an
external TFTP server:
(aruba) # wms export-db <filename for WMS db>
(aruba) # copy flash: <filename for db> tftp: <TFTP server IP address> <dest. filename>
(aruba) # local-userdb export <filename for local user db>
(aruba) # copy flash: <filename for db> tftp: <TFTP server IP address> <dest. filename>
Note— A valid IP route must exist between the TFTP server and the Mobility
Controller. Also required, a placeholder file with the proper write
permissions for each destination filename must exist on the TFTP
server prior to executing the copy commands.
Determine which memory partition will be used to hold the new software
image.
Use the following command to check the memory partitions:
ArubaOS 2.4.1.0 Part 0500116-01 12
Release Notes June 2005