Specifications

Security Target Version 1.0 9/29/2014
56
5.3.1 Development (ADV)
5.3.1.1 Basic functional specification (ADV_FSP.1)
ADV_FSP.1.1d
The developer shall provide a functional specification.
ADV_FSP.1.2d
The developer shall provide a tracing from the functional specification to the SFRs.
ADV_FSP.1.1c
The functional specification shall describe the purpose and method of use for each SFR-enforcing
and SFR-supporting TSFI.
ADV_FSP.1.2c
The functional specification shall identify all parameters associated with each SFR-enforcing and
SFR-supporting TSFI.
ADV_FSP.1.3c
The functional specification shall provide rationale for the implicit categorisation of interfaces as
SFR-non-interfering.
ADV_FSP.1.4c
The tracing shall demonstrate that the SFRs trace to TSFIs in the functional specification.
ADV_FSP.1.1e
The evaluator shall confirm that the information provided meets all requirements for content and
presentation of evidence.
ADV_FSP.1.2e
The evaluator shall determine that the functional specification is an accurate and complete
instantiation of the SFRs.
Component Assurance Activity:
There are no specific assurance activities associated with these SARs. The functional specification
documentation is provided to support the evaluation activities described in Section 4.1, and other
activities described for AGD, ATE, and AVA SARs. The requirements on the content of the
functional specification information is implicitly assessed by virtue of the other assurance
activities being performed; if the evaluator is unable to perform an activity because the there is
insufficient interface information, then an adequate functional specification has not been provided.
5.3.2 Guidance documents (AGD)
5.3.2.1 Operational user guidance (AGD_OPE.1)
AGD_OPE.1.1d
The developer shall provide operational user guidance.
AGD_OPE.1.1c
The operational user guidance shall describe, for each user role, the user-accessible functions and
privileges that should be controlled in a secure processing environment, including appropriate
warnings.
AGD_OPE.1.2c
The operational user guidance shall describe, for each user role, how to use the available interfaces
provided by the TOE in a secure manner.
AGD_OPE.1.3c
The operational user guidance shall describe, for each user role, the available functions and
interfaces, in particular all security parameters under the control of the user, indicating secure
values as appropriate.
AGD_OPE.1.4c
The operational user guidance shall, for each user role, clearly present each type of security-
relevant event relative to the user-accessible functions that need to be performed, including
changing the security characteristics of entities under the control of the TSF.
AGD_OPE.1.5c
The operational user guidance shall identify all possible modes of operation of the TOE (including