Owners manual

(Instant AP)# commit apply
To create a new VLAN assignment rule:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name>)# set-vlan <attribute> {{contains|ends-with|equals|matches-
regular-expression|not-equals|starts-with} <operand> <vlan>|value-of}
(Instant AP)(SSID Profile <name>)# end
(Instant AP)# commit apply
Configuring Security Settings for a WLAN SSID Profile
The following procedures are described in this section:
l Configuring Security Settings for an Employee or Voice Network on page 99
For information on guest network configuration, see Captive Portal for Guest Access.
If you are creating a new SSID profile, configure the WLANand VLAN settings before defining security settings.
For more information, see Configuring WLAN Settings for an SSID Profile on page 93 and Configuring VLAN
Settings for a WLAN SSID Profile on page 97.
Configuring Security Settings for an Employee or Voice Network
You can configure security settings for an employee or voice network by using the Instant UI or CLI.
In the Instant UI
To configure security settings for an employee or voice network:
1. In the Security tab, specify any of the following types of security levels by moving the slider to a desired level:
l Enterprise—On selecting enterprise security level, the authentication options applicable to the enterprise
network are displayed.
l Personal — On selecting personal security level, the authentication options applicable to the personalized
network are displayed.
l Open—On selecting Open security level, the authentication options applicable to an open network are
displayed:
The default security setting for a network profile is Personal.
The following figures show the configuration options for Enterprise, Personal, and Open security settings:
Figure 35 Security Tab: Enterprise
Aruba Instant 6.4.0.2-4.1 | User Guide WirelessNetwork Profiles | 99