Owners manual

75 | Initial Configuration Tasks Aruba Instant 6.4.0.2-4.1 | User Guide
Modifying the IAP Name
You can change the name of an IAP by using the Instant UI or CLI.
In the Instant UI
1. Navigate to System>General.
2. Specify the name of IAP in the Name text box.
3. Click OK.
In the CLI
To change the name:
(Instant AP)# name <name>
Updating Location Details of an IAP
You can update the physical location details of an IAP by using the Instant UI or CLI. The system location details are
used for retrieving information through the SNMP sysLocation MIB object.
In the Instant UI
To update location details:
1. Navigate to System>General.
2. Specify the location of an IAP in the System location text box.
3. Click OK.
In the CLI
To update location details of an IAP:
(Instant AP)(config)# syslocation <location-name>
(Instant AP)(config)# end
(Instant AP)# commit apply
Configuring a Preferred Band
You can configure a preferred band for an IAP by using the Instant UI or the CLI.
In the Instant UI
1. Navigate to System>General.
2. Select 2.4 GHz, 5 GHz or All from the Preferred band drop-down list for single-radio access points.
3. Click OK.
Reboot the IAP after configuring the radio profile for the changes to affect.
In the CLI
To configure a preferred band:
(Instant AP)(config)# rf-band <band>
(Instant AP)(config)# end
(Instant AP)# commit apply