Owners manual

71 | Instant User Interface Aruba Instant 6.4.0.2-4.1 | User Guide
Type
Code
Description Details Corrective Actions
100309 RADIUS server
authentication failure
The IAP cannot authenticate
this client using 802.1X ,
because the RADIUS server
rejected the authentication
credentials (password and so
on) provided by the client.
Ascertain the correct authentication
credentials and log in again.
100410 Integrity check failure in
encrypted message
The IAP cannot receive data
from this client , because the
integrity check of the received
message (MIC) has failed.
Check the encryption setting on the
client and on the IAP.
100511 DHCP request timed out This client did not receive a
response to its DHCP request
in time.
Check the status of the DHCP server in
the network.
Table 15: Alerts list
IDS
The IDSlink displays a list of foreign APs and foreign clients that are detected in the network. It consists of the
following sections:
l Foreign Access Points Detected— Lists the APs that are not controlled by the Virtual Controller. The following
information is displayed for each foreign AP:
n MAC address— Displays the MAC address of the foreign AP.
n Network— Displays the name of the network to which the foreign AP is connected.
n Classification— Displays the classification of the foreign AP, for example, Interfering IAP or Rogue IAP.
n Channel— Displays the channel in which the foreign AP is operating.
n Type— Displays the Wi-Fi type of the foreign AP.
n Last seen— Displays the time when the foreign AP was last detected in the network.
n Where— Provides information about the IAP that detected the foreign AP. Click the pushpin icon to view the
information.
l Foreign Clients Detected— Lists the clients that are not controlled by the Virtual Controller. The following
information is displayed for each foreign client:
n MAC address— Displays the MAC address of the foreign client.
n Network— Displays the name of the network to which the foreign client is connected.
n Classification— Displays the classification of the foreign client: Interfering client.
n Channel— Displays the channel in which the foreign client is operating.
n Type— Displays the Wi-Fi type of the foreign client.
n Last seen— Displays the time when the foreign client was last detected in the network.
n Where— Provides information about the IAP that detected the foreign client. Click the pushpin icon to view the
information.
The following figure shows an example for the intrusion detection log.