Owners manual

Figure 22 Alerts Link
The Alerts link displays the following types of alerts:
l Client Alerts
l Active Faults
l Fault History
Type of Alert Description Information Displayed
Client Alerts The Client alerts occur when
clients are connected to the
Instant network.
A client alert displays the following fields:
l Timestamp— Displays the time at which the client alert was
recorded.
l MAC address— Displays the MAC address of the client that
caused the alert.
l Description— Provides a short description of the alert.
l Access Points— Displays the IP address of the IAP to which
the client is connected.
l Details— Provides complete details of the alert.
Active Faults The Active Faults occur in the
event of a system fault.
An Active Faults consists of the following fields:
l Time— Displays the system time when an event occurs.
l Number— Indicates the number of sequence.
l Description— Displays the event details.
Fault History
The Fault History alerts occur in
the event of a system fault.
The Fault History displays the following information:
l Time— Displays the system time when an event occurs.
l Number— Indicates the number of sequence.
l Cleared by— Displays the module which cleared this fault.
l Description— Displays the event details.
Table 14: Types of Alerts
The following figures show the client alerts, fault history, and active faults:
Aruba Instant 6.4.0.2-4.1 | User Guide Instant User Interface | 68