Owners manual

59 | Instant User Interface Aruba Instant 6.4.0.2-4.1 | User Guide
Name Description
Info section in Client view
The Info section in the Client view displays the following information:
l Name— Displays the name of the client.
l IP Address— Displays IP address of the client.
l MAC Address— Displays MAC Address of the client.
l OS— Displays the Operating System that is running on the client.
l Network— Indicates the network to which the client is connected.
l Access Point— Indicates the IAP to which the client is connected.
l Channel— Indicates the channel that is currently used by the client.
l Type— Displays the channel type on which client is broadcasting.
l Role—Displays the role assigned to the client.
Table 9: Contents of the Info Section in the Instant Main Window
RF Dashboard
The RF Dashboard section lists the IAPs that exceed the utilization, noise, or error threshold. It also shows the
clients with low speed or signal strength in the network and the RF information for the IAP to which the client is
connected.
The IAP names are displayed as links. When an IAP is clicked, the IAP configuration information is displayed in the
Info section and the RF Dashboard section is displayed at the bottom left corner of the Instant main window.
The following figure shows an example of the RF dashboard with Utilization, Band frames, Noise Floor, and Errors
details:
Figure 16 RF Dashboard in the Monitoring Pane
The following table describes the icons available on the RF Dashboard pane: