Owners manual

Name Description
Info section in Virtual
Controller view
The Info section in the Virtual Controller view displays the following information:
l Name— Displays the Virtual Controller name.
l Country Code— Displays the Country in which the Virtual Controller is operating.
l Virtual Controller IP address— Displays the IP address of the Virtual Controller.
l Management: Indicates if the IAP is managed locally or through AirWave or
Aruba Central.
l Master— Displays the IP address of the Access Point acting as Virtual Controller.
l OpenDNS Status— Displays the OpenDNS status. If the OpenDNS status
indicates Not Connected, ensure that the network connection is up and
appropriate credentials are configured for OpenDNS.
l MAS integration— Displays the status of the MAS integration feature.
l Uplink type — Displays the type of uplink configured on the IAP, for example,
Ethernet or 3G.
l Uplink status — Indicates the uplink status.
l Blacklisted clients — Displays the number of blacklisted clients.
l Internal RADIUS Users — Displays the number of internal RADIUSusers.
l Internal Guest Users — Displays the number of internal guest users.
l Internal User Open Slots— Displays the available slots for user configuration as
supported by the IAP model.
Info section in Network view
The Info section in the Network view displays the following information:
l Name — Displays the name of the network.
l Status — Displays the status of the network.
l Type — Displays the type of network, for example, Employee, Guest, or Voice.
l IP Assignment— Indicates if the IAP clients are assigned IP address from the
network that the Virtual Controller is connected to, or from an internal auto-
generated IP scope from the Virtual Controller.
l Access— Indicates the level of access control configured for the network.
l WMM DSCP—Displays WMMDSCP mapping details.
l Security level— Indicates the type of user authentication and data encryption
configured for the network.
The info section for WLAN SSIDs also indicates status of Captive Portal and CALEA
ACLs and provides a link to upload certificates for internal server. For more
information, see Uploading Certificates on page 174.
Info section in Access Point
view
The Info section in the Access Point view displays the following information:
l Name — Displays the name of the selected IAP.
l IP Address — Displays the IP address of the IAP.
l Mode — Displays the mode in which the AP is configured to operate:
l In Access mode, the IAP serves clients, while also monitoring for
rogue APs in the background.
l In Monitor mode, the IAP acts as a dedicated monitor, scanning all
channels for rogue APs and clients.
l Spectrum — Displays the status of the spectrum monitor.
l Clients — Number of clients associated with the IAP.
l Type — Displays the model number of the IAP.
l Zone — Displays AP zone details.
l CPU Utilization — Displays the CPU utilization in percentage.
l Memory Free — Displays the memory availability of the IAP in MB.
l Serial number — Displays the serial number of the IAP.
l MAC— Displays the MAC address.
l From Port— Displays the port from where the slave IAP is learned in hierarchy
mode.
Table 9: Contents of the Info Section in the Instant Main Window
Aruba Instant 6.4.0.2-4.1 | User Guide Instant User Interface | 58