Owners manual

51 | Instant User Interface Aruba Instant 6.4.0.2-4.1 | User Guide
Figure 7 Security Window - Default View
Maintenance
The Maintenance link displays a window that allows you to maintain the Wi-Fi network. The Maintenance window
consists of the following tabs:
l About—Displays the name of the product, build time, IAP model name, the Instant version, website address of
Aruba Networks, and Copyright information.
l Configuration— Displays the following details:
n Current Configuration — Displays the current configuration details.
n Clear Configuration —Allows you to clear the current configuration details of the network.
n Backup Configuration — Allows you to back up local configuration details. The backed up configuration data
is saved in the file named instant.cfg.
n Restore Configuration — Allows you to restore the backed up configuration. The IAP must be rebooted after
restoring the configuration for the changes to affect.
l Certificates — Displays information about the certificates installed on the IAP. You can also upload new
certificates and set a passphrase for the certificates. For more information, see Uploading Certificates on page
174.
l Firmware — Displays the current firmware version and provides various options to upgrade to a new firmware
version. For more information, see Upgrading an IAP on page 321.
l Reboot — Displays the IAPs in the network and provides an option to reboot the required access point or all
access points. For more information, see Upgrading an IAP on page 321.
l Convert — Provides an option to convert an IAP to a mobility controller managed Remote AP or Campus AP, or
to the default Virtual Controller mode. For more information, see Converting an IAP to a Remote AP and Campus
AP on page 324.
The following figure shows the default view of the Maintenance window: