Owners manual

375 | IAP-VPN Deployment Scenarios Aruba Instant 6.4.0.2-4.1 | User Guide
AP Connected Switch Configuration
Client VLANs defined in this example must be opened on the upstream switches in multiple AP deployments, as
client traffic from slave to master is tagged with the client VLAN.
Datacenter Configuration
For information on controller configuration, see Configuring a Controller for IAP-VPN Operations on page 228. The
following OSPF configuration is required on the controller to redistribute IAP-VPN routes to upstream routers.
(host)(config) # router ospf
(host)(config) # router ospf router-id <ID>
(host)(config) # router ospf area 0.0.0.0
(host)(config) # router ospf redistribute rapng-vpn