Owners manual

Parameter Description
query-
response-
length-limit
Specify this parameter to set the maximum length of the GAS query response, in octets. You can
specify a value within the range of 1-127. The default value is 127.
roam-cons-len-
1
roam-cons-len-
2
roam-cons-len-
3
Specify the length of the organization identifier. The value of the roam-cons-len-1, roam-cons-
len-2, or roam-cons-len-3. The roaming consortium OIis based on the following parameters:
l 0: Zero Octets in the OI (Null)
l 3: OI length is 24-bit (3 Octets)
l 5: OI length is 36-bit (5 Octets)
venue-group
Specify one of the following venue groups
l assembly
l business
l educational
l factory-and-industrial
l institutional
l mercantile
l outdoor
l residential
l storage
l utility-and-misc
l vehicular
By default, the business venue group is used.
venue-type
Specify a venue type to be advertised in the ANQP IEs from IAPs associated with this hotspot
profile. For more information about the supported venue types for each venue group, see Table
68.
Table 69: Hotspot Configuration Parameters
Associating an Advertisement Profile to a Hotspot Profile
To associate a hotspot profile with an advertisement profile:
(Instant AP)(config)# hotspot hs-profile <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-protocol <protocol>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-3gpp <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-domain-name <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-ip-addr-avail <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-nai-realm <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-nwk-auth <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-roam-cons <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile anqp-venue-name <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile h2qp-conn-cap<name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile h2qp-oper-class <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile h2qp-oper-name <name>
(Instant AP)(Hotspot2.0 <name>)# advertisement-profile h2qp-wan-metrics <name>
(Instant AP)(Hotspot2.0 <name>)# end
(Instant AP)# commit apply
The configuration parameters for associating an advertisement profile with a hotspot profile are described in the
following table:
Aruba Instant 6.4.0.2-4.1 | User Guide Hotspot Profiles | 352