Owners manual

338 | Monitoring Devices and Logs Aruba Instant 6.4.0.2-4.1 | User Guide
l AP Captive Portal Auto White List—Displays details about the automatic whitelist configured for a captive portal
profile.
l AP Checksum—Displays checksum details for an IAP.
l AP Client Match Action—Displays details of the client match action.
l AP Client Match Live— Displays the live details of the client match configuration on an IAP.
l AP Client Match History— Displays the historical details of the client match configuration on an IAP.
l AP Client Match Status— Displays information about the client match configuration status.
l AP Client Match Triggers—Displays information about the client match triggers.
l AP Client Table—Displays the client details.
l AP Client View — Displays client details of an IAP.
l AP Country Codes— Displays country code details for the IAP.
l AP CPU Details— Displays detailed information about memory utilization and CPU load for system processes.
l AP CPU Utilization— Displays utilization of CPU for the IAP.
l AP Crash Info— Displays crash log information (if it exists) for the IAP. The stored information is cleared from the
flash after the AP reboots.
l AP Current Time— Displays the current time configured on the IAP.
l AP Current Timezone— Displays the current time zone configured on the IAP.
l AP Datapath ACL Table Allocation— Displays ACL table allocation details for the IAP.
l AP Datapath ACL Tables— Displays the list of ACL rules configured for the SSID and Ethernet port profiles.
l AP Datapath Bridge Table— Displays bridge table entry statistics including MAC address, VLAN, assigned
VLAN, Destination and flag information for the IAP.
l AP Datapath DMO Session— Displays details of a DMO session.
l AP Datapath Dns Id Map— Displays the mapping details for the DNS ID.
l AP Datapath DPI Session Table and AP Datapath DPI Session Table Verbose—Display the datapath
session table entries.
l AP Datapath Multicast Table— Displays multicast table statistics for the IAP.
l AP Datapath Nat Pool—Displays NAT pool details configured in the datapath.
l AP Datapath Route Table— Displays route table statistics for the IAP.
l AP Datapath Session Table— Displays the datapath session table statistics for the IAP.
l AP Datapath Statistics— Displays the hardware packet statistics for the IAP.
l AP Datapath User Table— Displays datapath user statistics such as current entries, pending deletes, high
water mark, maximum entries, total entries, allocation failures, invalid users, and maximum link length for the
IAP.
l AP Datapath VLAN Table— Displays the VLAN table information such as VLAN memberships inside the
datapath including L2 tunnels for the IAP.
l AP Daylight Saving Time—Displays the Daylight Saving Time configured on the IAP.
l AP Derivation Rules—Displays the role and VLANderivation rules configured on an IAP.
l AP DPI Debug statistics—Displays DPI statistics that can be used for debugging DPI issues.
l AP Driver Configuration— Displays driver configuration details of the IAP.
l AP Election and AP Election Statistics—Display the master election statistics.
l AP Environment Variable— Displays information about the type of antenna used by the IAP.
l AP ESSID Table— Displays the SSID profiles configured on the IAP.
l AP Flash Configuration— Displays statistics of the IAP configuration stored in flash memory.
l AP IGMP Group Table—Displays IGMP group information.