Owners manual

Running Debug Commands from the UI
To run the debugging commands from the UI:
1. Navigate to More>Support at the top right corner of the Instant main window. The Support window is displayed.
2. Select the required option from the Command drop-down list.
3. Select All Access Points or Instant Access Point(VC) from the Target drop-down list.
4. Click Run. When you run debug commands and click Save, the output of all the selected commands is
displayed in a single page.
Support Commands
You can view the following information for each access point in the cluster using the support window:
l AP 3G/4G Status— Displays the cellular status of the IAP.
l AP 802.1x Certificate— Displays the CA certificate and server certificate for the Virtual Controller.
l AP 802.1X Statistics— Displays the 802.1X statistics of the IAP.
l AP Access Rule Table— Displays the list of ACL rules configured on the IAP.
l AP Inbound Firewall Rules—Displays inbound firewall rules configured on the IAP
l AP Active— Displays the list of active APs in Instant network.
l AP Airgroup Cache— Displays the Bonjour Multicast DNS (mDNS) records for the IAP.
l AP Airgroup CPPM Entries— Displays the AirGroup CPPM policies of the registered devices.
l AP Airgroup CPPM Servers— Displays the AirGroup CPPM server information.
l AP Airgroup Debug Statistics— Displays the debug statistics for the IAP.
l AP Airgroup Servers— Displays information about the Bonjour devices which supports AirPrint and AirPlay
services for the IAP.
l AP Airgroup User— Displays the IP/MAC address, device name, VLAN, type of connection of the Bonjour
devices for the IAP.
l AP Allowed Channels— Displays information of the allowed channels for the IAP.
l AP Allowed MAX-EIRP— Displays information on the maximum EIRP settings that can be configured on an IAP
serving in a specific regulatory domain.
l AP All Supported Timezones— Displays all the supported time zones of Instant.
l AP ARM Bandwidth Management— Displays bandwidth management information for the IAP.
l AP ARM Channels— Displays ARM channel details for the IAP.
l AP ARM Configuration— Displays ARM configuration details for the IAP.
l AP ARM History— Displays the channel history and power changes due to Adaptive Radio Management (ARM)
for the IAP.
l AP ARM Neighbors— Displays the ARM neighbors of the IAP.
l AP ARM RF Summary— Displays the status and statistics for all channels monitored by the IAP.
l AP ARM Scan Times— Displays channel scanning information for the IAP.
l AP ARP Table— Displays the ARP table of the IAP.
l AP Association Table— Displays information about the IAP association.
l AP Auth-Survivability cache— Displays the list of 802.1X cached user's information.
l AP Authentication Frames— Displays the authentication trace buffer information of the IAP.
l AP BSSID Table— Displays the Basic Service Set (BSS) table of the IAP.
l AP Captive Portal Domains—Displays captive portal domains configured on the IAP.
Aruba Instant 6.4.0.2-4.1 | User Guide Monitoring Devices and Logs | 337