Owners manual

Figure 126 SNMPv3 User
4. Enter the name of the user in the Name text box.
5. Select the type of authentication protocol from the Auth protocol drop-down list.
6. Enter the authentication password in the Password text box and retype the password in the Retype text box.
7. Select the type of privacy protocol from the Privacy protocol drop-down list.
8. Enter the privacy protocol password in the Password text box and retype the password in the Retype text box.
9. Click OK.
10. To edit the details for a particular user, select the user and click Edit.
11. To delete a particular user, select the user and click Delete.
Configuring SNMP Community Strings in the CLI
To configure an SNMP engine ID and host:
(Instant AP)(config)# snmp-server engine-id <engine-ID>
(Instant AP)(config)# host <ipaddr> version {1 <name> udp-port <port>}|{2c|3 <name> [inform]
[udp-port <port>]}
To configure SNMPv1 and SNMPv2 community strings:
(Instant AP)(config)# snmp-server community <password>
To configure SNMPv3 community strings:
(Instant AP)(config)# snmp-server user <name> <auth-protocol> <password> <privacy-protocol>
<password>
To view SNMP configuration:
(Instant AP)# show snmp-configuration
Engine ID:D8C7C8C44298
Community Strings
-----------------
Name
----
SNMPv3 Users
------------
Name Authentication Type Encryption Type
---- ------------------- ---------------
SNMP Trap Hosts
---------------
IP Address Version Name Port Inform
---------- ------- ---- ---- ------
Aruba Instant 6.4.0.2-4.1 | User Guide Monitoring Devices and Logs | 333