Owners manual

332 | Monitoring Devices and Logs Aruba Instant 6.4.0.2-4.1 | User Guide
Configuring SNMP
This section describes the procedure for configuring SNMPv1, SNMPv2, and SNMPv3 community strings using the
Instant UI or CLI.
Creating community strings for SNMPv1 and SNMPv2 Using Instant UI
To create community strings for SNMPv1 and SNMPv2:
1. Click the System link at the top right corner of the Instant main window. The system window is displayed.
2. Click the Monitoring tab. The following figure shows the SNMP configuration parameters displayed in the
Monitoring tab.
Figure 125 Monitoring Tab: SNMP Configuration Parameters
3. Click New.
4. Enter the string in the New Community String text box.
5. Click OK.
6. To delete a community string, select the string, and click Delete.
Creating community strings for SNMPv3 Using Instant UI
To create community strings for SNMPv3:
1. Click System link at the top right corner of the Instant main window. The system window is displayed.
2. Click the Monitoring tab. The SNMP configuration parameters displayed in the Monitoring tab.
3. Click New in the Users for SNMPV3 box. A window for specifying SNMPv3 user information is displayed.