Owners manual

330 | IAP Maintenance Aruba Instant 6.4.0.2-4.1 | User Guide
3. In the IAP list, select the IAP that you want to reboot and click Reboot selected Access Point. To reboot all the
IAPs in the network, click Reboot All.
4. The Confirm Reboot for AP message is displayed. Click Reboot Now to proceed. The Reboot in Progress
message is displayed indicating that the reboot is in progress. The Reboot Successful message is displayed
after the process is complete. If the system fails to boot, the Unable to contact Access Points after reboot
was initiated message is displayed.
5. Click OK.