Owners manual

33 | About Aruba Instant Aruba Instant 6.4.0.2-4.1 | User Guide
What is New in Aruba Instant 6.4.0.2-4.1
The following features are added in the Aruba Instant 6.4.0.2-4.1 release:
Feature Description
Support for AppRF In this release, Instant supports AppRF comprising of two feature sets: On-board Deep
Packet Inspection (DPI) and Web Policy Enforcement (WPE). As part of the AppRF
feature support, Instant supports the following :
l Access control based on application and application categories
l Access control based on web categories and security ratings assigned to the
websites
Support for new 4G
modems
Instant now supports the following 4G modems:
l Netgear Aircard 341u
l Pantech UML295
l Franklin Wireless u770
l Huawei 3276s-150
AirGroup Enhancements Instant supports Universal Plug and Play (UPnP) and DLNA (Digital Living Network
Alliance) enabled devices. DLNA is a network standard derived from UPnP, which
enables devices to discover the services available in a network.
DSCP Mapping for WMM
Access Categories
Instant supports customization of Wi-Fi Multimedia to DSCP mapping configuration for
upstream and downstream traffic.
Fast roaming
enhancements
Instant supports 802.11k (Radio Resource Management) and 802.11v (BSS Transition
Management) standards to improve Quality of Service (QoS) and seamless connectivity.
Authentication
survivability with EAP-
TLS
Instant supports the authentication survivability feature with the EAP-TLS authentication
protocol. The authentication survivability feature supports a survivable authentication
framework against the remote link failure when working with the external authentication
servers.
Support for AP zone
configuration
You can configure zone settings on an IAP and an SSID, so that the SSID is created on s
specific IAP in the cluster.
Configurable port for
communication between
IAP and AirWave
management server
communication
You can customize the port number of the AirWave management server through the
server_host:server_port format, for example, amp.aruba.com:4343.
Client match
visualization
The Instant UI provides a graphical representation of the client distribution on an AP, the
RSSI details, and the channel availability and utilization metrics.
Console access to IAP In this release, you can allow or restrict access to an IAP console through the serial port.
By default, the console access to an IAP is enabled.
Backup RADIUS server
with EAP termination
Instant supports the configuration of the primary and backup RADIUS servers in an
enterprise WLANSSID that has EAP termination enabled.
Support for
TACACS+Server
In this release, a new external server type called TACACS+Server is added to support
authentication and accounting privileges for management users.
Table 4: New Features in 6.4.0.2-4.1